Screener / SEC EDGAR /CIK 0001563411 /10-K filed Feb 25, 2026, compared with Feb 28, 2025 /Numbers from the XBRL of the 10-Ks
NYSE Materials · Secondary Smelting & Refining of Nonferrous Metals

Constellium SE CSTM

Compare with peers Embed
SEC comment letters, last 20 years

5 reviews of CSTM's filings by SEC staff

UPLOAD and CORRESP
Reviews 5 latest letter Sep 29, 2023
Questions asked 243 each answered in the company's own letter
No closing letter 1 reviews without a letter saying the staff completed it

When the SEC's staff reviews a filing, it writes to the company with numbered questions, and the company answers each one in a letter. SEC publishes the exchange once the review is over, at least 20 business days later. A question is not an accusation; most reviews end with the company adding detail to its next filing.

How the reviews went

Every review on EDGAR, from the first staff letter to the letter that closes it

  1. 1. Staff letters 15 UPLOAD
  2. 2. Questions in them 243 numbered comments
  3. 3. Company replies 10 CORRESP
  4. 4. Reviews closed 4 of 5 closing letter

Half the closed reviews took 150 days or less from the first letter to the closing letter.

Form 20-F for the fiscal year ended December 31, 2022

2023-09-29 to 2024-03-05 · 14 questions · 3 letters from the SEC, 3 from the company
Review closed 2024-03-05
Non-GAAP measuresRevenueDerivatives and hedgingResults discussion (MD&A)SegmentsInventoryLiquidity and cashIncome taxes
Operating and Financial Review and Prospects · Results of Operations, page 40
SEC asked (1)
When you discuss revenue fluctuations between periods, specifically describe the extent to which changes are attributable to changes in prices, changes in the volume or amount of goods or services being sold, and the introduction of new products or services.
Rest of the question

Although you quantify on pages 40, 43, and 45-46 the percentage change in tons shipped and revenue per ton for the applicable fiscal years, you do not quantify the impact of volumes or prices in terms of revenue dollars. See Item 303(b)(2) of Regulation S-K and SEC Release No. 33-8350.

CSTM answered
We respectfully acknowledge the Staff’s comment and in future filings, we will include the information requested by the Staff above in relation to the discussion of revenue fluctuations between periods.
Read in the reply
Cost of Sales, page 41
SEC asked (2)
When you discuss changes in cost of sales between fiscal years, please ensure you also discuss changes in gross profit margin.
CSTM answered
We respectfully acknowledge the Staff’s comment and in future filings, we will discuss changes in gross profit margin when discussing changes in cost of sales between fiscal years, as requested by the Staff.

Segment Adjusted EBITDA,
Read in the reply
Segment Adjusted EBITDA, page 46
SEC asked (3)
We note that your Adjusted EBITDA calculation adjusts for “metal price lag,” which "is primarily calculated as the average value of product recorded in inventory, which approximates the spot price in the market, less the average value transferred out of inventory, which is the weighted average of the metal element of cost of sales, based on the quantity sold in the year." As it appears this adjustment may have the
Rest of the question

effect of changing recognition and measurement principles required to be applied under IFRS, please explain in greater the nature of and reasons for this adjustment and why it does not result in the presentation of an individually tailored measure pursuant to Question 100.04 of the Staff's Compliance and Disclosure Interpretations on Non-GAAP Financial Measures ("Non-GAAP C&DI's"). Considering providing illustrative examples of adjustment mechanics to assist our understanding.

CSTM answered
We respectfully acknowledge the Staff’s comment and submit that our adjustment for “metal price lag” complies with the guidance outlined in Question 100.04 of the Staff’s Compliance and Disclosure Interpretations on Non-GAAP Financial Measures, as more fully described below.

Constellium operates in the global semi-fabricated aluminium industry and its business model is to add value by converting aluminium into semi-fabricated and in some instances fabricated aluminium products, passing the cost of aluminium through to its customers.
Rest of the answer

Metals which Constellium purchases are subject to market price movements (which can sometimes be significant) and

Constellium prices its products with the objective of achieving metal price neutrality to its underlying business performance.

Constellium accounts for inventory using the weighted average cost methodology in accordance with IFRS. The value of products transferred out of inventory on sale and recognized in Cost of sales is thus at the weighted average cost of metal purchase prices, representing the average of metal purchase prices over several previous periods, but does not represent necessarily the actual cost of metal passed onto customers for sales during the period. Specifically, due to the impact of the cost of inventory on the calculation of

Cost of sales recognized during the period, there is a lag between metal purchase costs intended to be passed through to customers and metal purchase costs accounted in the Cost of sales, thus generally impacting Constellium’s IFRS operating results positively in periods of rising metal prices and negatively in periods of falling metal prices even though Constellium’s underlying operating performance has generally not been impacted by metal price movements. This effect is referred to as metal price lag. Constellium’s IFRS operating results can be significantly impacted by metal price lag despite Constellium’s ability to manage the metal cost pass-through.

The metal price lag adjustment is intended to eliminate this non-cash timing difference. It is based on a standardized methodology calculated at each of Constellium’s manufacturing sites which consists of bringing the weighted average cost of metal included in Cost of sales back to the actual cost of metal purchases of the period considered. It is calculated as the average value of the products transferred out of inventory at the time of sale, less the metal purchase price intended to be passed through to customers. The metal price lag adjustment thus enables Constellium to reflect in Adjusted EBITDA its underlying economic performance.

Adjusting for metal price lag provides Constellium’s management, equity and debt investors, analysts, banks, rating agencies and other stakeholders, with supplemental information and transparency regarding the underlying trend of business performance without the impact of the metal price lag created by the use of the weighted average cost method in the recognition of the Cost of sales. For Constellium’s management, Adjusted EBITDA excluding metal price lag is one of the critical metrics used internally to measure the business performance. Similarly, for investors and other stakeholders Adjusted EBITDA excluding metal price lag provides valuable insight into how the Company manages its business, incentivizes and compensates key employees, and provides transparency on the underlying performance of the business given its metal cost pass-through business model. In addition, Constellium’s presentation of Adjusted EBITDA excluding the metal price lag facilitates the comparison of its operating performance not only from period-to-period, but also versus that of other companies in the industry which are using similarly adjusted performance measures.

We respectfully advise the Staff that Adjusted EBITDA is also our measure of segment profitability in accordance with IFRS 8—Segment

Reporting. Accordingly, we are required to present such measure in our financial statements in accordance with IFRS and such measures are discussed in the MD&A in accordance with Rule S-K 303 and as contemplated in Question 104.02 of the Staff’s Compliance and Disclosure Interpretations on Non-GAAP Financial Measures. Considering the importance of this measure for internal purposes, we believe that disclosing the total Adjusted EBITDA as a supplement to our IFRS measures is enhancing investors’ understanding of Constellium’s performance as further explained below.

In Constellium’s view, adjusting for metal price lag does not result in the presentation of an individually tailored measure pursuant to

Question 100.04 of the Staff’s Compliance and Disclosure Interpretations on Non-GAAP Financial Measures. By definition, a non-GAAP measure excludes or includes amounts from a GAAP measure. Through our metal price lag adjustment, we have changed the IFRS weighted average cost of inventory sold to include or exclude the items shown in Exhibit 1. We have not changed recognition and measurement principles from an accrual basis to a cost basis or accelerated/decelerated expense recognition to achieve a desired non-GAAP earnings effect or to mislead investors. Rather, this adjustment excludes the impact of this discrete non-cash item on a specific period which helps to illustrate the impact, or lack thereof, of that particular item on the period. Moreover, this non-GAAP measure is presented each period using a consistent calculation methodology regardless of whether the adjustment has a positive or negative impact on the Company’s IFRS results. Finally, adjusting for metal price lag is a common practice used in the semi-fabricated metal industry given the inherent metal price lag impact on companies’ GAAP operating results compared to their underlying operating results, thereby showing more consistent performance comparisons for investors and other stakeholders.

To assist the Staff in their review, the Company has included an example illustrating the mechanics of its metal price lag adjustment as

Exhibit 1 to this letter.

Read in the reply
Liquidity and capital resources · Cash Flows, page 50
SEC asked (4)
Please provide a more informative discussion and analysis of cash flows from operating activities, including changes in working capital components, for the periods presented. In doing so, explain the underlying reasons and implications of material changes between periods to provide investors with an understanding of trends and variability in cash flows.
Rest of the question

Also ensure that your disclosures are not merely a recitation of changes evident from the financial statements. Refer to Item 303(a) of Regulation S-K and SEC Release No. 338350. Notes to the Consolidated Financial Statements 2.6 Principles governing the preparation of the Consolidated Financial Statements Trade account receivables, page F-13

CSTM answered
We respectfully acknowledge the Staff’s comment and in future filings, we will include the information requested by the Staff above in relation to the discussion of our cash flows from operations.

Notes to the Consolidated Financial Statements

2.6 Principles governing the preparation of the Consolidated Financial Statements Trade account receivables, page
Read in the reply
Liquidity and capital resources · Cash Flows, page 50
SEC asked (5)
We note that you recognize trade receivable at fair value through other comprehensive income ("OCI") since they are managed under an objective that results in both collecting the contractual cash flows and selling the receivables to factors.
Rest of the question

We further note your disclosures on pages F-13 and F-30 that you factor trade receivables under various factoring agreements and that, depending on the circumstances, the transfers appear to be accounted for as sales or financings. Please tell us how you determined all trade receivables should be accounted for at fair value through OCI. In doing so, tell us what consideration you gave to the accounting treatment applied, particularly those receivables that do not qualify as sales, and tell us if you originate any trade receivables that are not included in factoring programs or that do not meet eligibility requirements to be included in the program.

CSTM answered
In order to determine the applicable IFRS 9 – Financial Instruments (“IFRS 9”) business model for our trade receivables, we considered our business objective in managing trade receivables as well as the manner we have organized our activities in order to meet this objective. Our primary objective in managing our trade receivables portfolio is to ensure that the Company has sufficient liquidity at any point in time.
Rest of the answer

This objective is centrally managed by our Group Treasury Department which has full responsibility for monitoring the overall cash level at Constellium’s level and to factor our trade receivables depending on cash needs as determined at the consolidated group level. As a result, even though some of these receivables are not covered by a factoring program, we have considered our trade receivables as forming part of one global portfolio of financial assets that are held to sell or to collect. We believe that this approach is appropriate as it results in the determination of our business model at a level that reflects how groups of financial assets are managed together to achieve a particular business objective.

In addition, we respectfully advise the Staff that the difference between the nominal value and the fair value of our trade receivables is immaterial due to their short-term nature and the credit quality of our customers.

At

December 31, 2022, the amount of derecognized receivables was €368 million, and the outstanding balance of recognized receivables amounted to €465 million, of which €206 million was included in existing factoring programs.

Read in the reply
Hedge accounting, page F-15
SEC asked (6)
You disclose that you "did not adopt the disposition of IFRS 9" on hedge accounting and "therefore continue to apply the provisions of IAS 39." Please specify for us how IFRS 9 impacted your hedge accounting both for hedges existing at the time of adoption as well as those arrangements entered into prospectively after adoption.
CSTM answered
We respectfully advise the Staff that, upon adoption of IFRS 9 in fiscal year 2018, we elected to continue applying the hedge accounting requirements of IAS 39 – Financial Instruments: Recognition and Measurement (“IAS 39”) as permitted by IFRS 9 paragraph 9.7.2.21. At the time of adoption, we were applying hedge accounting to

(i) forward sales of U.S. Dollars designated as hedges of future forecasted cash flows and

(ii) forward sales of Swiss Francs designated as hedges of the net investment in one of our Swiss subsidiaries.
Rest of the answer

In subsequent years, we continued to enter into forward sales of U.S. Dollars designated as hedges of future forecasted cash flows. We believe that adoption of the hedge accounting provisions of IFRS 9 would have had no impact on the accounting for these transactions. However, we did not perform a full analysis of this impact and we respectfully advise the Staff that we are not aware of any requirement to disclose the impact of IFRS 9 when companies make the policy election of applying IAS 39 for hedge accounting.

Read in the reply
Share-based payment arrangements, page F-20
SEC asked (7)
We note your disclosure that share-based payment awards are expensed on a straight-line basis over the vesting period based on your estimate of equity instruments that will eventually vest. Considering you appear to issue awards with market conditions pertaining to the Total Shareholder Return performance of your shares, clarify your accounting policy disclosures to confirm, if true, that you recognize compensation
Rest of the question

expense for such awards irrespective of the outcome of the market condition. 2.7 Judgments in applying accounting policies and key sources of estimation uncertainty

CSTM answered
We confirm that compensation expense for our awards with market conditions pertaining to the Total Shareholder Return performance of our shares is recognized irrespective of the outcome of the market condition. In response to the Staff’s comment, we will clarify our accounting policy in future filings as follows:

Current disclosure:

Share-based payment arrangements

Equity-settled share-based payments to employees and Board members are measured at the fair value of the equity instruments at the grant date.

The fair value determined at the grant date is expensed on a straight-line basis
Rest of the answer

over the vesting period, based on the Group’s estimate of equity instruments that will eventually vest, with a corresponding increase in equity. At the end of each reporting period, the Group revises its estimate of the number of equity instruments expected to vest.

Revised disclosure:

Equity-settled share-based payments to employees and Board members are measured at the fair value of the equity instruments at the grant date.

Market performance conditions are reflected within the grant date fair value. Service and non-market performance conditions are not taken into account when determining the grant date fair value of awards, but the likelihood of the conditions being met is assessed as part of the Group’s best estimate of the number of equity instruments that will ultimately vest. The fair value determined at the grant date is expensed on a straight-line basis over the vesting period, based on the Group’s estimate of equity instruments that are expected to eventually vest based on the service and non-market vesting conditions, with a corresponding increase in equity. At the end of each reporting period, the Group revises its estimates of the number of equity instruments that are expected to vest based on the non-market vesting and service conditions. The impact of the revision to original estimates, if any, is recognized in profit or loss, with a corresponding adjustment to equity.

2.7 Judgments in applying accounting policies and key sources of estimation uncertainty Income Taxes, page F-20

Read in the reply
Income Taxes, page F-20
SEC asked (8)
We note your disclosure that "there are many transactions and calculations for which the ultimate tax determination is uncertain" and that you recognize liabilities "based on estimates of whether additional taxes will be due." Please tell us and disclose in further detail your accounting policy for uncertain tax treatments. In doing so, clarify how you apply the guidance in paragraphs 9-12 of IFRIC 23.
CSTM answered
to the Staff’s comment, we will clarify our accounting policy in future filings as follows:

Income Taxes

Significant judgment is sometimes required in determining the accrual for income taxes as there are many transactions and calculations for which the ultimate tax determination is uncertain during the ordinary course of business. The Group recognizes liabilities based on estimates of whether additional taxes will be due.
Rest of the answer

Where the final tax outcome of these matters is different from the amounts that were recorded, such differences will impact the current and deferred income tax provisions, results of operations and possibly cash flows in the year in which such determination is made.

The positions adopted by the Group in tax matters are based on its interpretation of tax laws and regulations. Some of those positions may be subject to uncertainty. In such cases, the Group assesses whether it is probable that the relevant tax authority will accept the tax treatment applied in its income tax filings, assuming that the taxation authority will examine the amounts reported in the Group’s tax filings and will have full knowledge of all relevant information when doing so.

If the Group concludes it is not probable that the taxation authority will accept the uncertain tax treatment, the effect of the uncertainty is measured on the basis of the Group’s best estimate and recognized in the determination of taxable results, tax bases, unused tax losses, unused tax credits.

Form 6-K furnished

February 22, 2023 Exhibit 99.

Read in the reply
Exhibit 99.1
SEC asked (9)
Considering Net Operating Profit after Tax ("NOPAT") is calculated differently from what appears to be the standard calculation, please consider revising the titles of your NOPAT and Return on Investment Capital ("ROIC") measures to identify them as "adjusted" measures or a similar term.
CSTM answered
We respectfully acknowledge the Staff’s comment and will appropriately label our NOPAT and ROIC measures as “Adjusted NOPAT” and

“Adjusted ROIC” in all future filings, earnings releases, investor presentations and similar materials.
Read in the reply
Exhibit 99.1
SEC asked (10)
Please address the following comments related to your presentation of the non-IFRS measure Value-Added Revenue ("VAR"): • We note your disclosure on page 16 that VAR eliminates the impact of metal price fluctuations, which includes the "cost of aluminium adjusted for metal lag, cost of other alloying metals, freight out costs, and realized gains and losses from hedging." As this measure appears to commingle revenue
Rest of the question

and costs, tell us why it does not represent an adjusted contribution margin measure rather than an adjusted revenue measure. Accordingly, tell us your basis for identifying revenue, rather than gross profit, as the most directly comparable IFRS measure to VAR. • Explain to us in sufficient detail and revise future filings to specify the nature and calculation of the adjustment for “hedged cost of alloyed metal.” • Tell us how you determined your VAR calculation does not result in the presentation of an individually tailored measure pursuant to Question 100.04 of the Non-GAAP C&DI's.

CSTM answered
We respectfully acknowledge the Staff’s comment and will appropriately reconcile our VAR measure to Gross Profit in future filings.

Explain to us in sufficient detail and revise future filings to specify the nature and calculation of the adjustment for “hedged cost of alloyed metal.”

Hedge costs of alloyed metal is comprised of the following elements: cost of aluminium (adjusted for metal lag), cost of alloying metals, freight out costs, and realized gains and losses from hedging.
Rest of the answer

In response to the Staff’s comment, in future filings, we will provide this information in a footnote to the reconciliation of VAR to Gross Profit that we will provide in future filings, as discussed above.

Tell us how you determined your VAR calculation does not result in the presentation of an individually tailored measure pursuant to Question 100.04 of the Non-GAAP C&DI’s.

We respectfully advise the Staff that our VAR measure is not intended to change the recognition and measurement principles applied in accordance with IFRS or to substitute an individually tailored non-GAAP measure for the appropriate IFRS measure. We believe VAR is a useful measure of our activity as it eliminates the impact of metal costs from our revenue and reflects the value-added elements of our activity. VAR eliminates the impact of metal price fluctuations which are not under our control and which we generally pass through to our customers and facilitates comparisons from period to period. As management of the Company uses VAR for internal purposes, we believe that disclosing it as a supplement to our IFRS measures enhances investors’ understanding of our performance.

Read in the reply
Operating and Financial Review and Prospects · Segment Adjusted EBITDA, page 46
SEC asked (1)
We note your response to comment 3 and the example provided in Exhibit 1. Our comment is in response to your presentation of Adjusted EBITDA in total. You state that the metal price lag adjustment is intended to eliminate the non-cash timing difference between metal purchase costs intended to be passed through to customers and metal purchase costs accounted in cost of sales.
Rest of the question

This adjustment appears to have the effect of changing the basis of accounting for inventory, which is inconsistent with Question 100.04 of the non-GAAP C&DI's. Please revise accordingly or explain in more detail why you believe this adjustment is appropriate.

CSTM answered
We respectfully acknowledge the Staff’s comment and submit that we believe our adjustment is appropriate as more fully described below.

As described in Constellium’s response letter dated October 30, 2023, Constellium accounts for inventory using the weighted average cost methodology in accordance with IFRS and as such, the metal price lag adjustment has not been considered nor included in Constellium’s accounting for inventory on the balance sheet.

Constellium includes the metal price lag adjustment in its Adjusted EBITDA in order to reflect its underlying economic performance.
Rest of the answer

The metal price lag adjustment brings the weighted average cost of metal included in cost of sales back to the actual cost of metal purchases in the period considered. The metal price lag adjustment is applied regardless of whether such adjustment has a positive or negative impact on the Company’s IFRS results and Constellium has consistently adopted this practice. Constellium believes that the metal price lag adjustment does not change recognition and measurement principles required to be applied in accordance with IFRS because first, the cost of sales is accounted for on a weighted average cost basis; and second, adjusting for metal price lag would bring Constellium’s cost of sales closer to how it would be accounted for under the LIFO methodology instead of the weighted average cost method. Based on the fact that the LIFO method is not allowed under IFRS, Constellium’s usage of metal price lag adjustment can be considered an approximation for accounting for its cost of sales under LIFO.

Constellium would like to reiterate that adjusting for metal price lag in Adjusted EBITDA is a common industry practice used by semi-fabricated metal companies given their inherent metal cost pass through business model rather than an individual practice used only by Constellium.

Constellium further believes that the intention of Question 100.04 is to prevent the presentation of a non-GAAP measure to be misleading for investors and other stakeholders. The metal price lag adjustment in Adjusted EBITDA removes the impact of changes in metal prices the Company intends to pass through, and which is presented in addition to the GAAP information. Not supplementing our IFRS results by a presentation of Adjusted EBITDA adjusting for metal price lag could, in Constellium’s view, not adequately reflect and describe our results to equity and debt investors, analysts, banks, rating agencies and other stakeholders, as the IFRS results alone would not accurately reflect how Constellium’s management manages the business, the underlying economic performance of its business, as well as its relative performance vs. other industry players.

In addition, Constellium’s management is compensated based on

Adjusted EBITDA targets adjusted for metal lag. It is our belief that the performance of the management and hence the resulting compensation should be transparent to our investors and as such we should provide them with the Adjusted EBITDA adjusted for metal lag for the consolidated company.

Read in the reply
Exhibit 99.1
SEC asked (2)
We note your response to comment 10. Please address the following comments related to your presentation of the non-IFRS measure Value-Added Revenue (“VAR”): • You indicate that you will revise your presentation in future filings to reconcile your VAR measure to gross profit, rather than revenue.
Rest of the question

Your basis for determining that gross profit is the most directly comparable financial measure presented in accordance with IFRS is unclear. Please explain, providing insight into whether you consider VAR to be a measure of revenue or profitability. • To help us better understand the adjustment “hedged cost of alloyed metal,” please provide us with a schedule quantifying the individual components of this adjustment and tell us in more detail why you believe it is appropriate to include a metal lag adjustment. • You state that VAR eliminates the impact of metal price fluctuations which are not under your control and generally passed through to your customers. Please clarify what you mean by “generally” and tell us if there have been instances when you have not been able to pass through aluminum costs to your customers. If so, tell us what that impact has been on VAR.

CSTM answered
We respectfully advise the Staff that as our VAR measure is calculated by deducting certain costs from revenues, we consider it as a measure of profitability.

To help us better understand the adjustment “hedged cost of alloyed metal,” please provide us with a schedule quantifying the individual components of this adjustment and tell us in more detail why you believe it is appropriate to include a metal lag adjustment.

The hedged cost of alloyed metal is comprised of the following elements:

Cost of alloying metals mostly includes cost of alloying elements such as magnesium, manganese,
Rest of the answer

silicon, zinc or copper.

As submitted in our previous correspondence with the Staff and in our response to the Staff’s comment above, the metal lag adjustment brings the weighted average cost of aluminium included in cost of sales back to the actual cost of aluminium purchases in the period passed onto customers, thus enabling Constellium to reflect in VAR its underlying economic performance.

You state that VAR eliminates the impact of metal price fluctuations which are not under your control and generally passed through to your customers. Please clarify what you mean by “generally” and tell us if there have been instances when you have not been able to pass through aluminum costs to your customers. If so, tell us what that impact has been on VAR.

We respectfully advise the Staff that Constellium’s business model is to pass its aluminium price exposure to its customers, by pricing its products to include the cost of the metal purchased in the period considered and achieve aluminium price neutrality. However, a few of its contracts include fixed aluminium prices and in those limited instances, Constellium aims to achieve aluminium price neutrality through hedging its aluminium price exposure based on forward curves, thereby generally matching its cost of aluminium to the fixed-prices of aluminium and hedged results, with minimal discrepancies.

Although we believe that this measure provides useful information, in light of the Staff’s comment, we would be happy to discuss with the Staff developing an alternative metric for future filings.

Read in the reply
Operating and Financial Review and Prospects · Segment Adjusted EBITDA, page 46
SEC asked (1)
We note your response to prior comment 1. We continue to believe that the adjustment for metal price lag to arrive at Adjusted EBITDA, or any other non-GAAP measure, is inconsistent with the guidance in Question 100.04 of the Staff's Compliance and Disclosure Interpretations on Non-GAAP Financial Measures. Please remove this adjustment from all non-GAAP measures in future filings.
CSTM answered
to prior comment 2 states that you consider the non-GAAP measure Value-Added Revenue (“VAR”) as a measure of profitability, which is calculated by deducting certain costs from revenues. We also note from your response that the hedged cost of alloyed metal adjustment does not include all cost of sales items related to the revenue presented in the measure.
Rest of the answer

As a profitability measure, excluding cost of sales items related to the recognized revenue could be misleading considering the measure would exclude normal, recurring, cash operating expenses necessary and directly related to the revenue recognized. Please provide the following information related to the adjustments included in this non-GAAP measure:

Provide revenue disaggregated for the amount related to contracts that allow you to pass-through aluminum and alloyed metal prices to customers and those that are based on fixed pricing.

For contracts that allow you to pass-through aluminum and alloyed metal prices, explain whether it is within the contract terms that such costs are pass-throughs to the customers, whether the arrangements are considered cost-plus fixed fee or cost reimbursable plus fee types of contracts, and how the cost of the aluminum and alloyed metals are included on invoices or billings to the customer.

Explain how the cost of aluminum and cost of alloying metals amounts are determined for the “Hedged cost of alloyed metal” adjustment. For example, tell us whether it represents the actual cost within your cost of sales line item that is based on the weighted average cost of metal under IFRS or another calculation, such as the average all-in aluminum price based on the location where metal was purchased, multiplied by the metal sold in the period.

As discussed with the Staff, we have determined that, beginning with the reporting of our first quarter 2024 results, we will no longer report

Value Added Revenue (“VAR”) in future filings.

Read in the reply
Exhibit 99.1, page 14
SEC asked (2)
Your response to prior comment 2 states that you consider the non-GAAP measure Value- Added Revenue (“VAR”) as a measure of profitability, which is calculated by deducting certain costs from revenues. We also note from your response that the hedged cost of alloyed metal adjustment does not include all cost of sales items related to the revenue presented in the measure.
Rest of the question

As a profitability measure, excluding cost of sales items related to the recognized revenue could be misleading considering the measure would exclude normal, recurring, cash operating expenses necessary and directly related to the revenue recognized. Please provide the following information related to the adjustments included in this non-GAAP measure: • Provide revenue disaggregated for the amount related to contracts that allow you to pass-through aluminum and alloyed metal prices to customers and those that are based on fixed pricing. • For contracts that allow you to pass-through aluminum and alloyed metal prices, explain whether it is within the contract terms that such costs are pass-throughs to the customers, whether the arrangements are considered cost-plus fixed fee or cost reimbursable plus fee types of contracts, and how the cost of the aluminum and alloyed metals are included on invoices or billings to the customer. • Explain how the cost of aluminum and cost of alloying metals amounts are determined for the “Hedged cost of alloyed metal” adjustment. For example, tell us whether it represents the actual cost within your cost of sales line item that is based on the weighted average cost of metal under IFRS or another calculation, such as the average all-in aluminum price based on the location where metal was purchased, multiplied by the metal sold in the period.

CSTM answered

No numbered answer found in the reply. Read the reply ↗

Also in this review: request for more time, Oct 4, 2023, request for more time, Nov 29, 2023, closing letter, 2024-03-05

Constellium N.V.

2018-08-31 to 2018-09-19 · 2 questions · 1 letter from the SEC, 1 from the company
Review closed 2018-09-19
Russia and Ukraine
Form 20-F for the Fiscal Year Ended December 31, 2017 · Note 17 - Investments Accounted for Under the Equity Method, page F-40
SEC asked (1)
We note that you account for your 51% interest in the joint venture with UACJ using the equity method. Please tell us the factors you considered in determining that consolidation of this joint venture was not required. Please explain your basis for concluding consolidation is not required and how you considered the factors in paragraph 7 of IFRS 10.
CSTM answered
In May 2014, Constellium signed an agreement with UACJ Corporation (“UACJ”) for the formation of

Constellium-UACJ ABS LLC (the “Joint Venture”). The Joint Venture operates a facility located in Bowling Green, Kentucky and supplies aluminium auto body sheet to the North American automotive industry. The Company and UACJ, indirectly through their subsidiaries, hold 51% and 49%, respectively, of the membership interests in the Joint Venture.
Rest of the answer

Constellium’s investment in the Joint Venture has been accounted for using the equity method since the Joint Venture’s formation in 2014.

According to paragraph 7 of IFRS 10, an investor controls an investee if, and only if, the investor has all the following:

(i) power over the investee; (ii) exposure, or rights, to variable returns from its involvement with the investee; and (iii) the ability to use its power over the investee to affect the amount of the investor’s return.

Page

According to paragraph 10 of IFRS 10, an investor has power over an investee when the investor has existing rights that give it the current ability to direct the “relevant activities,” i.e., those activities that significantly affect the investee’s returns. In the context of our joint venture agreement with

UACJ, Constellium has determined the relevant activities of the Joint Venture to be its key operating, investing and financing activities, such as: (a) determining the business plan, annual budget and business and operating strategy in the following areas: purchase of raw materials, selection of technology for manufacturing, compensation policies for management and marketing and sales; (b) capital expenditures and other similar commitments; and (c) incurrence of debt and dividend distributions.

The Joint Venture’s Board of Managers consists of seven voting members and one non-voting observer. Four voting members are appointed by Constellium, and three voting members and one non-voting observer are appointed by UACJ. For decisions relating to relevant activities, the joint venture agreement requires the approval of not less than five of the seven members of the board of directors. This requirement effectively results in UACJ having a veto power over relevant activities, and Constellium having no ability to direct a decision without UACJ’s consent. As a result, Constellium currently does not have the right to direct the relevant activities of the Joint Venture, and, as such, does not have power over the Joint Venture as such term is defined in IFRS 10. In the absence of such power, Constellium has concluded that it does not control the Joint Venture and that, as a result, consolidation would not be appropriate.

In future filings, we will clarify our disclosure so that a reader of Constellium’s consolidated financial statements may better understand the reasons that led Constellium to account for the Joint Venture under the equity method, as follows (new disclosure underlined):

“Constellium-UACJ ABS LLC, a joint-venture in which Constellium holds a 51% interest, was created in 2014. This joint-venture operates a facility located in Bowling Green, Kentucky and supplies aluminium sheet to the North American automotive industry. The joint venture started its operations during 2016. We have determined that, under the terms of the joint venture agreement, we do not control

Constellium-UACJ ABS LLC because our existing rights associated with the decision-making process do not give us the ability to direct the relevant activities of the joint venture unilaterally and, as a result, Constellium does not have power over the joint venture.”

Read in the reply
General
SEC asked (2)
On pages 37 and 40, you identify Airbus, Daimler AG, BMW, Volkswagen and the PSA Group as customers.Each of these companies includes your products in its own products, and each sells its products in Syria and/or Sudan.Syria and Sudan are designated by the U.S. Department of State as state sponsors of terrorism, and are subject to U.S. sanctions and/or export controls.
Rest of the question

You do not provide disclosure about these countries in your Form 20-F. Please describe to us the nature and extent of any past, current, and anticipated contacts with Syria and/or Sudan, including with their governments, whether through subsidiaries, distributors, resellers, or other direct or indirect arrangements.

CSTM answered
Constellium has a general policy of not contracting with persons and or entities in sanctioned countries, including in Sudan and Syria. Constellium does not directly sell its products to the governments of, or any entities located in, Syria or Sudan. After our review and to the best of its knowledge, Constellium also has not had any past contacts and there are no current or anticipated contacts with Syria and/or Sudan, including contacts with their respective governments whether through subsidiaries, distributors, resellers or other direct or indirect arrangements.
Rest of the answer

In addition, Constellium has no employees, operations, points of sale, subsidiaries, affiliates, partners, joint venture interests, or investments in Syria or Sudan.

Constellium is a global leader in the design and manufacture of a broad range of innovative specialty rolled and extruded aluminium products, serving primarily the packaging, aerospace and automotive end-markets. Constellium supplies aluminium wrought plates, sheet and extruded products to the aerospace and automotive original equipment manufacturers (“OEMs”) referenced in the Staff’s comment. However, these customers then transform and/or use Constellium’s products in their own products for their own end-customers.

Constellium products supplied to these customers are not specific to the markets or countries to which these customers supply their separate products. Constellium does not manufacture any products for these or other customers specifically for sale in Syria and Sudan.

Read in the reply

Also in this review: closing letter, 2018-09-19

Form 20-F for the Fiscal Year Ended December 31, 2015

2016-06-08 to 2016-07-11 · 3 questions · 1 letter from the SEC, 1 from the company
Review closed 2016-07-11
SegmentsGoodwill and impairmentLiquidity and cashAcquisitionsCritical estimates
Form 6-K Filed May 12, 2016 · Exhibit 99.1
SEC asked (1)
During January 2016, you agreed to amend certain terms in a sales contract with one of your major customers, including an improvement in the contract terms for establishing the timing of the measurement of the Mid-West Transaction Price component of the sales prices and eliminating the customer’s early payment discount, among many other changes.
Rest of the question

These amended terms took effect from January 1, 2016 and resulted in a new obligation for you to pay the customer €20 million, which was recorded as a reduction to net sales in the period ended March 31, 2016. Please further clarify in your disclosures how the amended terms of this sales contract led to you being obligated to pay your customer €20 million.

CSTM answered
In response to the Staff’s comment, we supplementally provide that this one-time payment was made in consideration for agreeing to amend certain terms to an existing customer contract to which an entity acquired as part of the Wise acquisition was a party. We entered into the re-negotiation of these terms in order to align the terms of this contract with Constellium’s normal terms of business. The payment of €20 million is a non-refundable contract-modification fee and was recorded as a reduction of revenues.
Rest of the answer

Such modification did not include any additional commitment from the customer to extend the contract duration or purchase additional volumes. We therefore propose to add to note D to the adjusted EBITDA reconciliation in our upcoming Form 6-K for the six months ended June 30, 2016 the following clarifying text:

“Wise one-time costs related to a one-time payment of €20 million, recorded as a reduction of revenues, in relation to the re-negotiation of payment terms, pass through of Midwest premium amounts and other pricing mechanisms in a contract with one of Wise’s customers. We entered into the re-negotiation of these terms in order to align the terms of this contract, acquired during the acquisition of Wise, with Constellium’s normal terms of business.”

Form 20-F for the Year Ended December 31,

2015

Financial Statements

Notes to the Financial Statements

Note 13

– Intangible Assets (Including Goodwill), page F-35

Read in the reply
Notes to the Financial Statements · Note 13 – Intangible Assets (Including Goodwill), page F-35
SEC asked (2)
After identifying certain triggering events related to the Muscle Shoals cash-generating unit, you recorded a €400 million impairment charge related to the intangible assets (excluding goodwill) and property, plant and equipment of this cash-generating unit during the year ended December 31, 2015.
Rest of the question

Goodwill is allocated and monitored at the operating segments level which represent groups of cash-generating units and the Muscle Shoals cash-generating unit appears to be part of the Packaging and Automotive Rolled Products operating segment. Based on your disclosures on page F-35, you determined that no goodwill impairment charge needed to be recorded for this operating segment as of December 31, 2015. Please help us better understand how you performed your goodwill impairment test related to the Packaging and Automotive Rolled Products operating segment and correspondingly how you made the determination that no goodwill impairment charge needed to recorded. Please address the following as part of your response:  Please identify the cash-generating units included in the Packaging and Automotive Rolled Products operating segment. Your disclosures on page F-11 indicate that cash-generating units generally correspond to an industrial site;  We note that the Muscle Shoals cash-generating unit originated as part of the Wise Entities acquisition in January 2015. Please tell us how you determined goodwill should be allocated related to this acquisition pursuant to IAS 36.80, including what consideration was given to whether goodwill should be allocated to a particular cashgenerating unit or groups of units;  It appears that you have determined your recoverable amount to be the fair value less costs of disposal amount for the Packaging and Automotive Rolled Products operating segment rather than the value-in-use amount pursuant to IAS 36. Please clearly disclose this and correspondingly provide all of the disclosures required by IAS 36.134(e). In arriving at the fair value less costs of disposal, please tell us how you determined it was appropriate to use expected future cash flows projected over a ten-year period as well as to reflect the significant expected capital expenditures related to your investment in being able to produce Body-in-White sheet and the corresponding expected returns. In this regard, we note that your disclosures on page F-11 indicate that your value-in-use calculations use cash flow projections based on financial budgets approved by management and cover usually a five-year period; and  Please help us better understand how you determined that you should use the valuein-use method for purposes of arriving at the recoverable amount of the Muscle Shoals cash-generating unit versus using the fair value less costs of disposal method for purposes of arriving at the recoverable amount of the Packaging and Automotive Rolled Products operating segment pursuant to IAS 36. Your disclosures on page 37 indicate that the Muscle Shoals factory is currently focused on can stock but is expected to be capable of producing high-quality Body-in-White sheet after making significant investments. Please address what impact both the current and future expected use of the Muscle Shoals factory had on your impairment tests of both the Muscle Shoals cash generating unit and the Packaging and Automotive Rolled Products operating segment.

CSTM answered
Our Packaging and Automotive Rolled Products (“P&ARP”) operating segment includes three cash generating units, which are the following industrial sites: Singen (Germany), Neuf-Brisach (France) and Muscle Shoals (USA).

We note that the Muscle Shoals cash-generating unit originated as part of the Wise Entities acquisition in January 2015.
Rest of the answer

Please tell us how you determined goodwill should be allocated related to this acquisition pursuant to IAS 36.80, including what consideration was given to whether goodwill should be allocated to a particular cash-generating unit or groups of units;

Response:

We allocated the goodwill related to the Muscle Shoals acquisition in January 2015 to the P&ARP operating segment as we viewed this acquisition as a key part of our expansion strategy for this segment as a whole.

Our P&ARP strategy, operations, internal organization and strategic investment are made or organized on a global basis for the operating segment as a whole. Any investment in Muscle Shoals is made considering the segment wide P&ARP strategy. Our internal reporting is in line with this structure, the investments and results being allocated and monitored by our CODM at the P&ARP operating segment level.

All of our P&ARP cash generating units are expected to benefit from the synergies with Muscle Shoals:

– Increased product development resources,

– Increased technical expertise cross-sharing

– Improved competitive position,

– Enhanced global reach, and

– Greater operation flexibility.

Muscle Shoals produces packaging rolled products, which primarily include beverage can stock (like the materials Singen and Neuf Brisach presently produce). As publicly disclosed, we are investing to increase Muscle Shoals’ existing hot mill capacity and to build Body-in-White capacity. Accordingly, Muscle Shoals will also produce automotive rolled products in the future (like the materials Singen and Neuf-Brisach presently produce). This will enable us to serve global beverage can customers as well as global automotive customers from all of our sites in Europe and in the United States.

It appears that you have determined your recoverable amount to be the fair value less costs of disposal amount for the Packaging and Automotive Rolled Products operating segment rather than the value-in-use amount pursuant to IAS 36. Please clearly disclose this and correspondingly provide all of the disclosures required by IAS 36.134(e).

Response:

In response to the Staff’s comment, we propose to include in future filings the following information regarding fiscal year 2015, to supplement the disclosure on page F-35 (new text is underscored):

“For the P&ARP operating segment, the recoverable value

(determined on the basis of fair value less costs of disposal) was estimated by applying a discounted cash flow model and market participant’s assumptions and has been classified as a level 3 measurement under the fair value hierarchy provided by IFRS 13.

The projected future cash flows are based on the 2016-2025 medium and long term business plan approved by management and reviewed by the Board of Directors. They include the significant capital expenditures for Body-in-White (up to 2020/2021) and the related returns. Considering the significant level of future capital expenditure needed to address the

Body-in-White market with the related Body-in -White cash inflows ramping-up from 2018/2019 and reaching a normative level in 2023/2024, cash flows were projected over a 10-year period. The terminal value assumes a normative cash flow and a long term-growth rate ranging from 0% to 2%. The discount rates applied to cash flows projections range between 11% and 12%. It was concluded that the carrying value did not exceed the recoverable value as at December 31, 2015. Accordingly, the impairment test carried out at the P&ARP operating segment level did not lead to a goodwill impairment.

The key assumptions used in the determination of the fair value less costs of disposal for the P&ARP operating segment are the discount rate, the perpetual growth rates used to extrapolate cash-flows beyond the forecast period and the forecasted shipments for

Body-in-White products and related revenues. They have been determined considering what market participants would assume in estimating fair value.

Discount rates used represent the current market assessment of the risks specific to the P&ARP operating segment taking into consideration the time value of money and the risks associated with the underlying assets.

The growth rates used to extrapolate cash-flows beyond the forecast period were developed internally and are consistent with external sources of information.

Expected shipments and related revenues were determined based on estimates of future supply and demand for Body-in-White products. These estimates were developed internally based on our industry knowledge and our analysis of available market data regarding expected future demand and industry capacity.

Sensitivity analysis: the calculation of the recoverable value of the P&ARP operating segment is most sensitive to the following assumptions:

Discount rate: an increase in the discount rate by 2% would result in the recoverable value equaling the carrying value;

Perpetual growth rate : a decrease in the perpetual growth rate by 5% would result in the recoverable value equaling the carrying value; or

Body-in-White shipments: 40% lower shipments in the Body-in-White US business would result in the recoverable value equaling the carrying value. Considering the overall size and length of the Body-in-White project, management determined forecasted shipments and related revenues to be a key assumption.”

In arriving at the fair value less costs of disposal, please tell us how you determined it was appropriate to use expected future cash flows projected over a ten-year period as well as to reflect the significant expected capital expenditures related to your investment in being able to produce Body-in-White sheet and the corresponding expected returns. In this regard, we note that your disclosures on page F-11 indicate that your value-in-use calculations use cash flow projections based on financial budgets approved by management and cover usually a five-year period.

Response:

As disclosed on page F-11, it is our policy to use cash flow projections covering a 5-year period for value-in-use calculations. The expected future cash flows used to determine the fair value less costs of disposal for our P&ARP operating segment have been projected over a ten-year period for the reasons outlined below.

The fair value less costs of disposal was estimated by applying a discounted cash flow model and incorporates assumptions that market participants would use in estimating fair value.

We believe market participants would consider acquiring the P&ARP business as a whole, given the businesses included (the unique combination of packaging and automotive rolled products, including can stock and Body-in-White) and the geographical global coverage.

Retaining a ten-year period is necessary to take into account the Body-in-White future business

(including related required capital expenditures and corresponding expected returns). This ten-year period is consistent with market participants’ views and assumptions, considering:

the time required to complete the significant capital expenditures and the ramp up of the Body-in-White industrial capacity; and the Body-in-White future expected returns based on market maturity and needs as evidenced by external market studies.

Please help us better understand how you determined that you should use the value-in-use method for purposes of arriving at the recoverable amount of the Muscle Shoals cash-generating unit versus using the fair value less costs of disposal method for purposes of arriving at the recoverable amount of the Packaging and Automotive Rolled Products operating segment pursuant to IAS 36. Your disclosures on page 37 indicate that the Muscle Shoals factory is currently focused on can stock but is expected to be capable of producing high-quality Body-in-White sheet after making significant investments. Please address what impact both the current and future expected use of the Muscle Shoals factory had on your impairment tests of both the Muscle Shoals cash generating unit and the Packaging and Automotive Rolled Products operating segment.

Response:

In accordance with IAS 36, the net carrying value of a cash generating unit or a group of cash generating units is compared to its recoverable value, which is the higher of the value in use and the fair value less cost of disposal. The impairment test was performed first at the Muscle Shoals cash-generating unit level for which there was an indicator of impairment and then at the level of the group of cash-generating units that constitutes the P&ARP operating segment where goodwill is tested.

Muscle Shoals cash generating unit

At December 31, 2015, Muscle Shoals had not started to produce Body-in-White products and the assets to be tested were being used to produce can stock products only. Consequently, we have measured the cash-generating unit’s value-in-use based on projections of discounted cash flows prepared for the existing can stock activity. In accordance with IAS

36.44, such cash flows do not take account of future restructurings not committed to nor future capital expenditures that would improve the performance of the assets to be tested.

In parallel, we have determined that a fair value less cost of disposal of the cash-generating unit on a standalone basis does not exceed the value-in-use. [***]

[TEXT FROM PAGE 7 OF THIS LETTER HAS BEEN OMITTED AND PROVIDED

SEPARATELY TO THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT UNDER RULE 24B-2 AND RULE 83.]

Accordingly, both the value in use and fair value less cost of disposal were considered. It was determined that a fair value less cost of disposal exceeding the value-in-use on a standalone basis could not be demonstrated. Thus, the value-in-use was retained as part of the impairment tests.

P&ARP operating segment

The P&ARP operating segment includes the activities of both our packaging rolled products (including can stock) and our automotive rolled products (including Body-in-White) coming from the European and North American markets.

The P&ARP operating segment’s carrying value includes the goodwill resulting from the acquisition of Muscle Shoals, which we monitor at this level. As disclosed on page F-24, this goodwill is supported by the growing automotive markets (Body-in-White).

The fair value less cost of disposal was estimated by applying a discounted cash flow model and market participant assumptions, which reflects the expected development of the Body-in-White activity (expected capital expenditures and returns / cash inflows) both in Europe and in North America. We believe that the Body-in-White future cash flows including the capital expenditures and related benefits represent the cash flows that a market participant would identify and allocate to this activity. This approach reflects our view that market participants interested to acquire our complete P&ARP operating segment (to participate in the

Body-in-White market and benefit from our global reach, both in terms of geographical coverage and products) exist.

As it was concluded that the carrying value did not exceed the recoverable value (based on fair value less cost of disposal), (i) the impairment test did not lead to a goodwill impairment and (ii) the value-in-use was not considered.

Overall, the impairment test results (partial impairment of our Muscle Shoals cash generating unit and no impairment of our P&ARP operating segment) are consistent with the global economic and business trend changes we have noted between the acquisition period (late 2014) and the impairment test exercise (late 2015 / early 2016). [***]

[TEXT FROM PAGE 8 OF THIS LETTER HAS BEEN OMITTED AND PROVIDED SEPARATELY TO THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST

Read in the reply
Notes to the Financial Statements · Note 13 – Intangible Assets (Including Goodwill), page F-35
SEC asked (3)
We note that you provide a sensitivity analysis related to the assumptions used in arriving at the recoverable value of the Packaging and Automotive Rolled Products operating segment as well as disclose the values assigned to these assumptions. Please also provide the amount by which the recoverable amount exceeds the carrying amount related to this operating segment pursuant to IAS 36.134(f).
CSTM answered
In response to the Staff’s comment, we propose to include in future filings the following information, to supplement the disclosure on page F-35 (new text is underscored): “It was concluded that the carrying value (€ 1,080 million) did not exceed the recoverable value (€1,355 million) as at December 31, 2015.”

* * * * * *

In response to your request, the Company acknowledges that:

the Company is responsible for the adequacy and accuracy of the disclosure in the filings;

Staff comments or changes to disclosure in response to Staff comments do not foreclose the Commission from taking any
Rest of the answer

action with respect to the filing; and the Company may not assert Staff comments as a defense in any proceeding initiated by the Commission or any person under the federal securities laws of the United States.

We hope that the foregoing has been responsive to the Staff’s comments. If you have any questions or comments regarding the foregoing, please do not hesitate to contact me at +33 1 73 01 40 87 or by email at [email protected]. In addition, you are welcome to contact Frédéric Dunod, Constellium’s Director of External Reporting and Investor Relations, at +33 (0)1 73 01 41 32 or by email at [email protected] or Rina E. Teran, Constellium’s US Chief Counsel, Chief Securities Counsel and Assistant Corporate Secretary, at (212) 675 5087 or by email at [email protected].

Read in the reply

Also in this review: closing letter, 2016-07-11

Form 20-F

2014-08-19 to 2015-01-16 · 31 questions · 3 letters from the SEC, 4 from the company
Review closed 2015-01-16
SegmentsResults discussion (MD&A)Income taxesLiquidity and cashPensionsRevenueDerivatives and hedgingChinaInventoryNon-GAAP measures
Item 5. Operating and Financial Review and Prospects, page 53
SEC asked (1)
In future filings, please provide a discussion and analysis of the LME aluminum stockpiling rules along with the implications to your financial statements.
CSTM answered
We note the draft disclosure you provided in response to comment 4 in our letter dated August 19, 2014. Please expand your disclosure to provide an analysis of each of the factors listed as materially impacting your effective tax rate. For example, it is unclear what the specific movements in the recognition of deferred tax assets are. Please provide us with the expanded disclosure you would have included in your 2013 Form 20-F.

The Company acknowledges the Staff’s comment and will expand the disclosure to provide an analysis of the factors impacting our effective tax rate.
Rest of the answer

Although our future disclosure will be dependent on the facts and circumstances of each period, the following would be the expanded disclosure for the fiscal period 2013 on pages 64 and 65 of our Form

20-F (new text is underscored):

“An income tax charge of €39 million was recognized for the year ended December 31, 2013, from

€46 million for the year ended December 31, 2012. The effective tax rate for the year ended December 31, 2013 was 29% compared to 24% for the year ended December 31, 2012. This 5 percentage point increase in our effective tax rate reflects the following:

• the 2012 effective tax rate was favorably impacted by the use of unrecognized deferred tax assets, resulting in a 14 percentage point increase in 2013. The use of unrecognized deferred tax assets in 2012 resulted from the gain on Ravenswood OPEB pension plan amendments.

a 6 percentage point favorable impact from increases in tax credits and reimbursements, primarily with respect to our operations in the United States; and, a 3 percentage point favorable impact from the mix of profits as a result of a lower weight of profits in higher tax rate jurisdictions (most notably the United States).

Read in the reply
Results of Operations, page 59
SEC asked (2)
For both the consolidated and segment results of operations discussions, please quantify the impact of each factor when multiple factors contribute to material changes in a line item as well as discuss the underlying business reasons for material changes between periods in line items in future filings.
Rest of the question

Please refer to the quantification of multiple factors and the analysis of the underlying reasons for each factor you provided for the comparison of fiscal years 2012 and 2011 to guide management in providing a discussion and analysis of fiscal years 2013 and 2012 in future filings. Refer to Items 303(a)(3)(i) and (iii) of Regulation S-K as well as Sections 501.04 and 501.12.b. of the Financial Reporting Codification for guidance.

CSTM answered
We note from recent earnings call transcripts that you referenced EBITDA by “market” (e.g., aerospace, body-in-white, automotive extrusions) on multiple occasions. Please reconcile these references to your statement in your response to comment 6 in our letter dated August 19, 2014 that the CODM does not receive profitability or cash flow metrics on a markets basis nor on a key product basis as your financial systems and financial reporting are not set up to record this.
Rest of the answer

In your response, provide us with the reports the CODM regularly reviews from fiscal years 2012 through 2014 and describe to us any other financial information regularly provided to the CODM through meetings or otherwise that is not captured within such reports.

We respectfully confirm to the Staff that, as stated in our response to comment 6 in our letter dated September 15, 2014, our Chief Operating Decision Maker (“CODM”) does not receive profitability or cash flow metrics breaking down the Company’s total results on a market basis (Aerospace, Automotive, Packaging) nor on the basis of the key products listed on page 28 of our Form 20-F. Our CODM reviews reports in which our business activities are presented in several different ways, such as by business unit and within each business unit. Notably, discrete financial information is provided to our CODM under the following three different reporting views:

By business units:

Aerospace & Transportation (“A&T”)

Packaging & Automotive Rolled Products (“P&ARP”)

Automotive Structures & Industry (“AS&I”) and, within each business unit:

By plants (for example):

Issoire

Ravenswood

Neuf Brisach

Singen

Decin

Sierre

By product lines (for example):

A&T aero

A&T non-aero

Rigid packaging

Body-in-white

Customized solutions

Extrusion soft alloys

Extrusion hard alloys

Extrusion automotive structures

The statements referenced in the Staff’s question were made by our CEO based on, or derived from, the information by product lines that is provided to him. We at times disclose information in relation to some of our markets or product lines when we believe that information is helpful to investors. This disclosure has historically been limited to revenue and adjusted EBITDA, which is in line with the discrete information available internally.

We respectfully advise the

Staff that we have considered the guidance in IFRS 8 paragraph 8, which states that “If the chief operating decision maker uses more than one set of segment information, other factors may identify a single set of components as constituting an entity’s operating segments, including the nature of the business activities of each component, the existence of managers responsible for them, and information presented to the board of directors.”

After considering the following factors, we have concluded that the “business unit view” constitutes our operating segments:

Nature of business activities: Our three business units are made up of logically organized and homogeneous business activities structured around similar industrial processes (see our response to the Staff’s comment

#3 below).

Existence of segment managers: Each of our business units is managed by a business unit President (“BU President”) reporting directly to the CODM, whereas product lines do not necessarily have a separate manager and if they do, the manager reports to the BU President not to the CODM. Plant managers report to BU Presidents, but not to the CODM. The BU Presidents are directly responsible for all operational, commercial and financial activities of their business unit.

Information presented to the Board of directors: Out of the different reporting views presented to our CODM the “business unit view” is the only one that is reported to our Board of directors.

In addition, our CODM uses the information by Business Unit to assess performance and allocate resources, but not the information by plant and product line which is being provided to him on a supplemental basis and primarily used by the BU Presidents to manage their respective business units.

We also note that historically, discrete financial information by plants or product lines has not been consistently presented to our CODM period over period and has been evolving over time (for example, different groupings or classifications), whereas information by business unit has been systematically and consistently presented to the CODM on a regular basis.

Our CODM is provided with the following information packages which are presented to him during monthly review meetings:

Financial Review Operations Committee

AS&I Operating Review

P&ARP Operating Review

A&T Operating Review

We have submitted on a supplemental basis, and are separately requesting confidential treatment of, certain reports provided to our CODM that we believe are indicative of the reports the CODM regularly reviews.

Read in the reply
Results of Operations, page 59
SEC asked (3)
In future filings, please provide a discussion and analysis of the nature of realized gains (losses) on derivatives for each period presented along with a discussion as to the extent the realized gains (losses) are offset by (losses) gains recognized for the underlying in a different line item.
CSTM answered
We note from your response to comment 6 in our letter dated August 19, 2014 that each of your business units is managed by a segment manager reporting directly to the CEO. Please explain to us the reasons why your organization is structured as it is. In this regard, tell us the business reasons for having one president responsible for Aerospace & Transportation, another responsible for Packing & Automotive Rolled Products, and a third responsible for Automotive Structures & Industry.
Rest of the answer

In addition, describe to us the synergies associated with combining responsibility for the respective markets in the manner that you have.

The Company has been organized on a business unit basis since its formation in January 2011 (historically, the predecessor companies of Constellium had a similar organization). This organization is designed around similarities in our industrial processes, products, applications and customer base.

Each of our business units combines dedicated plants using similar industrial processes, producing similar classes of products and serving similar types of customers, as illustrated by the following chart:

Main plants

Industrial process

Main products applications customers

Business

Units

Singen Extrusion (1)

Extrusion

Extrusions

Automotive Transportation

Industry

Automotive OEMs, (3)

Stadler, CA F

AS&I

Sierre Extrusion (2)

Gottmadingen

Thin-gauge rolling

Coils/sheets

Packaging Automotive

Can makers,

Automotive OEMs (3)

P&ARP

Singen Rolling (1)

Thick-gauge rolling

Plates/sheets

Aerospace,

Transportation Industry

Aerospace OEMs,

Ryerson, Amari

ThyssenKrupp,

FreightCar America

A&T

Sierre Rolling (2)

1)

Although these two plants are located on the same site in Singen (Germany), they are clearly distinct plants and only share site infrastructure (such as security, roads)

2)

Although these two plants are located on the same site in Sierre (Switzerland), they are clearly distinct plants and only share site infrastructure (such as security and roads)

3)

Although the extruded products from our AS&I and the thin-gauge rolled products from our P&ARP business units are both sold to Automotive

OEMs, we consider that we have two distinct classes of customers as the AS&I extruded products and the P&ARP thin-gauge rolled products are typically sold to different groups within the OEMs’ organizations. Thin-gauge rolled products are purchased by the OEM’s department in charge of raw material purchases whereas extruded products are generally considered as vehicle components and their purchase involves other groups within the purchasing, engineering and quality departments. In addition, our involvement with the OEMs in the sales cycle takes place at different points of the vehicle development cycle (commercial contracts for extruded products tend to be negotiated approximately three years prior to start of production whereas commercial terms for thin-gauge rolled products are typically negotiated 18 months prior to start of production).

Industrial Processes: Each of our plants is dedicated to only one of our industrial processes (extrusion, thin-gauge rolling and thick-gauge rolling).

Our AS&I business unit combines plants producing extruded products. Aluminum extrusion is a technique used to transform aluminum billets into objects with a definitive cross-sectional profile. In this process, heated aluminum is forced through a die.

Our P&ARP business unit combines plants producing thin-gauge rolled products. The rolling process consists of passing aluminum through a hot rolling mill and then transferring it to a cold rolling mill in order to reduce the thickness of the metal. The thickness of our P&ARP products typically ranges from 300 microns to a maximum of 2 millimeters. The industrial process is designed to produce high volumes of thin-gauge products at a high speed and with a focus on surface quality (which is apparent in our customer’s end products such as a beverage can or the body of a car), thickness tolerance and flatness.

Our A&T business unit combines plants producing thick-gauge rolled products. The industrial process in our A&T business unit shares some characteristics with the process in our P&ARP business unit described above as both business units are rolling metal. However, there are fundamental differences between the rolling operations of our P&ARP business unit and those of our A&T business unit. Notably, in the A&T business unit, the thickness of the end product is different and typically ranges from 10 millimeters up to 20 centimeters and above. Also, compared to our PAR&P industrial process, our A&T process is designed to produce smaller volumes of thicker products at a slower speed and with a focus on the metallurgical and mechanical qualities of the products (note that surface quality for our A&T products is not a priority as these products are typically heavily machined by our customers prior to being used).

As an illustration of how the focus on the metallurgical and mechanical qualities of the product (as opposed to the surface aspect) impacts our industrial processes, we note that unlike P&ARP products A&T products are subject to quenching and, in order to relieve internal structural stress, require heavy stretching.

Products: Our products are divided into three main categories: extruded products, thick-gauge rolled products and thin-gauge rolled products. Extruded products are only produced and sold by our AS&I business unit (with the minor and clearly immaterial exception of our Montreuil-Juigné plant which reports under A&T). Our P&ARP business unit produces thinner products such as coils and sheets for can body stock, closures, automotive body-in-white, heat exchangers and reflective sheeting. Our A&T business unit is mainly dedicated to the production of thicker plate and sheet products (generally ranging from10-20mm to above 20 centimeters). In addition, we have historically developed new products on a business unit by business unit basis

Type or class of our customer for the products: Our sales teams are set up on a business-unit basis and each of our business units have key customers.

We consider the customers of each business unit to be a separate category and respond to the different needs of each of these categories of customers.

Because of the highly specialized nature of our plants and industrial processes, we do not have the capability to switch the production of segment specific products between our business units. We do not have significant synergies across our three business units outside of our procurement processes, primarily due to the difference in products and industrial processes as described above.

Read in the reply
Results of Operations, page 59
SEC asked (4)
In future filings, please provide a more comprehensive discussion and analysis of the material factors impacting the effective tax rate for each period presented, including quantification of the extent to which each material factor impacted the effective tax rate.
Rest of the question

When changes in earnings in jurisdictions with varying statutory tax rates is the cause, please disclose the jurisdictions with changes in earnings and differing statutory tax rates.

CSTM answered
We note on your website information by “Markets.” Please tell us how the products and services by “Markets” align with your three defined operating segments.

Our website displays the 10 markets in which we operate: aerospace, industry, automotive, building, transportation, renewable energy, distribution, sports and leisure, defense and packaging. The purpose of this information is to demonstrate the breadth of our customer and product offerings, while we operate primarily in three key markets: aerospace, automotive and packaging (as indicated in our response to question 3).
Rest of the answer

Our website is designed to be helpful to a wide range of constituents and, in particular to customers. For this reason, our products are described and organized in our website in a way in which a wide variety of customers might identify how we might serve them. This information is not for internal management purposes and does not purport to describe how we manufacture our products or organize our business.

The information by “Markets” from our website reconciles to our operating segments as follows:

Read in the reply
Consolidated Statement of Comprehensive Income/(Loss), page F-4
SEC asked (5)
We note that you have not recognized any currency translation differences as part of other comprehensive income/(loss) and have not provided a reconciliation of net exchange differences recognized as part of accumulated other comprehensive income/(loss).
Rest of the question

Please provide us with an understanding as to why you have no currency translation differences considering your disclosure on page F-8 that you are a global leader in the design and manufacture of specialty rolled and extruded aluminum products with manufacturing facilities in the United States, Europe and China. Please refer to IAS 21 for guidance.

CSTM answered
We note from your response to comment 10 in our letter dated August 19, 2014, that you believe the products within each reportable segment are similar because they are all made from aluminum. Please provide us an analysis of how you considered the similarity of products using the guidance in IFRS 8.12 (i.e., nature of products and services, nature of production processes, type or class of customer, distribution methods, regulatory environments). To the extent the products are not similar, provide the disclosures required by IFRS 8.32 for your various products and services.
Rest of the answer

We refer you to your description of the reportable segments beginning on page 28 of your most recent Form 20-F.

We have assessed our products and believe that there is a basis for aggregation due to similar production processes and customers as outlined in our response to question 3. All our products are aluminium based and can be grouped into three categories that share common characteristics, production processes and customer bases: extruded products, thick-gauge rolled products and thin-gauge rolled products. These categories are aligned with our business unit organization, as described below:

Automotive Structures & Industry mainly produces and distributes extruded products.

Packaging &Automotive Rolled Products mainly produces and distributes thin-gauge rolled products such as can and closure stock, auto-body sheet or flexible packaging.

Aerospace & Transportation mainly produces and distributes thick-gauge rolled products such as plates and sheets.

Read in the reply
Note 2 – Summary of Significant Accounting Policies, page F-9 · 2.4 Presentation of the Operating Performance of each Operating Segment and of the Group, page F-10
SEC asked (6)
We note your reportable segments are based on a combination of product lines, markets and industries served. In several presentations filed as exhibits to your Forms 6-K, the primary discussions of your operating results by your CEO appear to be focused on your markets (i.e., aerospace, automotive rolled, automotive extrusions, and packaging).
Rest of the question

The operating results trends for these markets differ significantly from the operating results trends of the reportable segments these markets are included in. Specifically, we note a question raised during the fourth quarter of fiscal year 2013’s results earnings call regarding growth rates for the automotive structures and industries segment only being 2%. The CEO’s response to the question noted that the segment results is a mix of a lot of different trends with the pure automotive structure growing 17% year-over-year. Please reconcile for us the reportable segments identified in the Form 20-F and how the business is discussed publicly in terms of operating results. If your reportable segments are an aggregation of operating segments, please provide us with your aggregation analysis in accordance with IFRS 8.12. If there has been a change in how the CODM is managing the business since December 31, 2013, and is the cause of any differences, please confirm you will be revising your reportable segment presentation in your next Form 20-F in accordance with IFRS 8.29 - .30.

CSTM answered
We note the draft disclosure you provided in response to comment 11 in our letter dated August 19, 2014. Please expand this disclosure to explain the material causes for the changes between each period presented

(e.g., changes in either tax rates or the mix of profits earned in different jurisdictions).
Rest of the answer

Please refer to IAS 12.81(d) and .85 for guidance.

The Company acknowledges the Staff’s comment and will expand the disclosure to clarify whether the material causes for the change in our composite tax rate are changes in tax rates or changes in the mix of profits earned in the different jurisdictions in which we operate.

Although our future disclosure will be dependent on the facts and circumstances of each period, the following is the expanded disclosure for the fiscal period 2013 on pages F-31 of our Form 20-F (new text is underscored):

“Our composite statutory income tax rate of 36.0% in the year ended December 31, 2013 and of 38.6% in the year ended December 31,

2012 resulted from the statutory tax rates (i) in France of 38.0% in 2013 and 36.1% in 2012, (ii) in the United States of 40.1% in 2013 and 41.2% in 2012, (iii) in Germany of 29% in 2013 and in 2012 and (iv) in the Netherlands of

25% in 2013 and in 2012. The 2.6% decrease in our composite tax rate from 2012 to 2013 resulted from a lower weight of profits in higher tax rate jurisdictions most notably the United States.”

Read in the reply
2.6 Judgments in Applying Accounting Policies and Key Sources of Estimation Uncertainty, page F-20
SEC asked (7)
In future filings, please expand your disclosures provided in accordance with IAS 1.125 - .133 to provide investors with more company-specific descriptions of the assumptions and judgments made for each of the areas presented.
Rest of the question

Please also provide disclosures that discuss the facts and circumstances that could result in a reasonably possible, material change in the assumptions and judgments along with a description of the impact the change would have to your consolidated financial statements. Please provide us with the disclosures you would have provided in your fiscal year 2013 Form 20-F in response to this comment.

CSTM answered
We note your response to comment 12 in our letter dated August 19, 2014. To help us better understand your position that Class B ordinary shares do not meet the definition of shares per IAS 33.19 - .29 for purposes calculating basic earnings per share, please provide us with the revisions to your disclosures in Notes 12 and 18 that you intend to include in future filings.
Rest of the answer

In addition, clarify in your response and disclosures whether the holders of

Class B ordinary shares participate in profits if they do not request that the shares be repurchased.

The Company acknowledges the

Staff’s comment and will expand the disclosure to clarify the treatment of the Class B ordinary shares in the earnings per share calculation.

The following is the expanded disclosure for the fiscal year ended December 31, 2013 on page F-32 of Note 12 of our Form 20-F (new text is underscored):

“(A) Based on the total number of all classes of shares (former “A”, “B1” and “B2”) until our Initial Public Offering on

May 22, 2013 (“IPO”, and on the total number of Class A ordinary shares from the IPO (See NOTE 18—Share Capital).

Prior to the IPO, the Class B ordinary shares were included in the basic and diluted earnings per share calculation as the Class A and B ordinary shares had equal rights to profit allocation and dividends and Class B ordinary shares, once issued, could not be repurchased nor cancelled by the Company without the consent of the holder.

In connection with our IPO, the Management Equity Plan (“MEP”) was frozen so that there could be no additional issuances or reallocations thereunder of Class B ordinary shares among MEP participants. In addition, from the date of the IPO, at the request of the MEP participants in certain circumstances, the Company is committed to repurchase these shares, and may subsequently cancel them (including the related accumulated rights to profit). In all other cases, Class B shares are ultimately converted into Class A shares.

Accordingly, from the IPO date, Class B ordinary shares have been excluded from the calculation of the weighted average number of ordinary shares used to calculate the basic earnings per share, but are included in the calculation of the weighted average number of ordinary shares used to calculate the diluted earnings per share.”

Finally, we respectfully advise the Staff that by the end of 2014, the Class B ordinary shares will have fully vested and thus been converted to Class A ordinary shares or repurchased by the Company.

Read in the reply
2.6 Judgments in Applying Accounting Policies and Key Sources of Estimation Uncertainty, page F-20
SEC asked (8)
Please tell us your consideration of including the assumptions and judgments related to the realization of inventories as a source of estimation uncertainty to your consolidated financial statements in accordance with IAS 1.125 - .133.
CSTM answered
We note your response to comment 14 in our letter dated August 19, 2014. As previously requested, please expand your disclosures here and/or within Note 30 to clarify the conversion terms of the Class B ordinary shares (i.e., automatically converted into Class A ordinary shares once the vesting conditions disclosed within Note 30 on page F-66 have been met or the specific facts and circumstances the Class B ordinary shares are convertible into

Class A ordinary shares).

The Company acknowledges the Staff’s comment and will expand the disclosure to clarify the conversion terms of the Class B
Rest of the answer

ordinary shares. Although our future disclosure will be dependent on the facts and circumstances of each period, the following is the expanded disclosure for the fiscal year ended December 31, 2013 on page F-40 of our Form 20-F (new text is underscored):

“The Class A ordinary shares and Class B ordinary shares are entitled to an equal profit allocation.

At the applicable MEP interest vesting date (the vesting conditions being summarized in NOTE 30—Share Equity Plan), the related Class

B ordinary shares are thereby converted into Class A ordinary shares. There are no other circumstances where Class B ordinary shares might be converted into Class A ordinary shares.

Class B ordinary shares that are not converted into Class A ordinary shares will be repurchased by Constellium N.V. and may be subsequently cancelled.”

Read in the reply
Note 4 – Operating Segment Information, page F-23
SEC asked (9)
In future filings, please include segment capital expenditure disclosures or amounts of other additions to non-current assets for the same periods presented for the statements of cash flows. Please refer to IFRS 8.24(b).
CSTM answered
We note your response to comment 15 in our letter dated August 19, 2014. While we note that you have provided some information on a disaggregated basis, it remains unclear the specific facts and circumstances you considered in determining the reconciliation disclosures required by IAS 19.140 at a more disaggregated level is not material based on the guidance in IAS 19.138.
Rest of the answer

Please advise or confirm to us that you will provide the reconciliation listed in paragraph 140 of IAS 19 at a disaggregated level (i.e., geographical locations, plan type, et cetera).

The Company confirms that the reconciliation required by IAS 19.140, on a plan-type level, will be provided in our next Form 20-F.

Read in the reply
Note 4 – Operating Segment Information, page F-23
SEC asked (10)
In future filings, please provide the disclosures required by IFRS 8.32 for your various products and services. Please refer to your disclosures on pages 28-35 of your Form 20-F.
CSTM answered
to the Staff’s comment we will include in future filings the following additional disclosure in Note 25 – Deferred Income Taxes, based on the facts and circumstances as of the date of our future financial statements (new text is underscored):

“Based on the expected taxable income of the entities, the Group believes that it is more likely than not that a total of

€516 million (€497 million at December 31, 2012; €651 million at December 31, 2011) of deductible temporary differences, unused tax losses and unused tax credits will not be used.
Rest of the answer

Consequently, net deferred tax assets have not been recognized. The related tax impact of €153 million (€175 million at December 31, 2012; €188 million at December 31, 2011) is attributable to the following:

(in millions of Euros)

At December 31,

2013

2012

Tax losses

(62

)

(40

In 2013

—

(2

In 2014

In 2015

In 2016

In 2017

In 2018 and after (limited)

(15

Unlimited

(18

(19

Unused tax credits

Deductible temporary differences

(91

(135

Depreciation and Amortization

(9

(14

Pensions

(77

(116

Other

(5

Balance at December 31

(153

(175

Substantially all of the tax losses not expected to be used reside in the Netherlands and in France.

The holding companies in the Netherlands have been generating tax losses over the past three years, and these holding companies are not expected to generate sufficient profits in the foreseeable future to utilize these tax losses before they expire in 2018, 2019 and 2020.

The tax losses not expected to be utilized in France relate to losses generated by certain of our French companies prior to joining the tax consolidation group created on January 1, 2012. Although tax losses do not expire in France and although the French tax consolidation group is profitable, tax losses generated prior to joining the tax group by loss-generating companies can only be utilized on a stand-alone basis. It is more likely than not that these loss-making companies will not be able to utilize their losses on a stand-alone basis in the foreseeable future. Consequently, the related deferred tax assets have not been recognized.

Substantially all the unrecognized deferred tax assets on deductible temporary differences on pension relate to the

United States. In assessing the recoverability of these deferred tax assets we have carefully considered the available positive and negative evidence, and determined that the positive evidence (such as recent profits, which were positively impacted by non-recurring favourable items) is less objectively verifiable and still carries less weight than the negative evidence (such as long history of operating losses and lack of long term visibility on future operating profits) in the assessment of long term deferred tax asset recognition. Accordingly, the net long term deferred tax assets on pension have not been recognized.

Read in the reply
Note 11 – Income Tax, page F-31
SEC asked (11)
In future filings, please provide investors with an understanding of the material components of your composite tax rate, how the rate was calculated, and the material causes for the changes between each period presented (e.g., changes in either tax rates or the mix of profits earned in different jurisdictions). Please refer to IAS 12.81(d) and .85 for guidance.
CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 12 – Earnings Per Share, page F-31
SEC asked (12)
We note your disclosures in footnote (A) on page F-32 that you have not included the Ordinary B shares in the basic earnings per share calculation. We further note your disclosure on page F-40 that Class A ordinary shares and Class B ordinary shares are entitled to an equal profit allocation.
Rest of the question

Please provide us with a more comprehensive discussion of the material terms of the Class B ordinary shares to explain why no allocation of earnings was made to the Class B ordinary shares for the periods presented for purposes of calculating basic earnings per share. Please refer to IAS 33.19 - .29 for guidance.

CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 12 – Earnings Per Share, page F-31
SEC asked (13)
In future filings, please provide the disclosures required by IAS 33.70(c) for the instruments that were not included in the calculation of diluted earnings per share. In this regard, it appears that you have only included the Class B ordinary shares related to the Management Equity Plan in diluted earnings per share and not the restricted stock units granted under the Free Share Program or the Shareholding
Rest of the question

Retention Program.

CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 18 – Share Capital, page F-39
SEC asked (14)
Please expand your disclosures here and/or within Note 30 to clarify that the Class B ordinary shares are automatically converted into Class A ordinary shares once the vesting conditions disclosed within Note 30 on page F-66 have been met or to clarify the specific facts and circumstances the Class B ordinary shares are convertible into Class A ordinary shares.
CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 21 – Pension and Other Post-Employment Benefit Obligations, page F-45
SEC asked (15)
Please tell us your consideration of the guidance in IAS 19.138 for providing the reconciliation disclosures required by IAS 19.140 at a more disaggregated level.
CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 22 – Provisions, page F-52
SEC asked (16)
In future filings, please expand your assessment of materiality for the asbestos claims to your financial condition and cash flows in addition to your results from continuing operations.
CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 22 – Provisions, page F-52
SEC asked (17)
In future filings, please provide the disclosures you provided for the asbestos claims for your mesothelioma claims.
CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 25 – Deferred Income Taxes, page F-61
SEC asked (18)
In future filings, please expand your disclosure to provide investors with an understanding of the facts and circumstances that led to your conclusion that €153 million of deferred tax assets will not be used before expiration resulting in the assets not being recognized either here or within Note 2.6 in accordance with IAS 1.125.
CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 30 – Share Equity Plan, page F-66
SEC asked (19)
In future filings, please provide the disclosures required by IFRS 2.45 and .47 for each of your share-based compensation plans.
CSTM answered

No numbered answer found in the reply. Read the reply ↗

Item 5. Operating and Financial Review and Prospects, page 53 · Results of Operations, page 59
SEC asked (1)
We note the draft disclosure you provided in response to comment 4 in our letter dated August 19, 2014. Please expand your disclosure to provide an analysis of each of the factors listed as materially impacting your effective tax rate. For example, it is unclear what the specific movements in the recognition of deferred tax assets are.
Rest of the question

Please provide us with the expanded disclosure you would have included in your 2013 Form 20-F.

CSTM answered
We note from your response to comment 2 in our letter dated October 10, 2014, that your CODM is provided with discrete financial information by business unit, by plants, and by product lines. In future filings, please consider including this more detailed information to better communicate the material factors impacting your operating results.
Rest of the answer

Such factors include, for example, disclosure of the following:

• the amount of the contribution to P&ARP’s revenues from the 27% increase in Body-in-White shipments, along with the amount by which the decrease in packaging products impacted segment revenues;

and in your analysis of management adjusted EBITDA, quantification of the impact of the increased shipments for the aerospace sector; the impact of weaker prices for your non-aerospace segments along with an explanation as to why prices are weaker; and the impact of the less favorable product mix in aerospace applications along with an explanation as to what the specific changes in aerospace product applications were.

Refer to Items 303(a)(3)(i) and (iii) of Regulation S-K as well as Sections 501.04 and 501.12.b. of the Financial Reporting Codification for guidance.

The Company acknowledges the Staff’s comment and will expand its disclosure in future filings.

Read in the reply
Note 2 – Summary of Significant Accounting Policies, page F-9 · 2.4 Presentation of the Operating Performance of each Operating Segment and of the Group, page F-10
SEC asked (2)
We note from recent earnings call transcripts that you referenced EBITDA by “market” (e.g., aerospace, body-in-white, automotive extrusions) on multiple occasions. Please reconcile these references to your statement in your response to comment 6 in our letter dated August 19, 2014 that the CODM does not receive profitability or cash flow metrics on a markets basis nor on a key product basis as your financial systems
Rest of the question

and financial reporting are not set up to record this. In your response, provide us with the reports the CODM regularly reviews from fiscal years 2012 through 2014 and describe to us any other financial information regularly provided to the CODM through meetings or otherwise that is not captured within such reports.

CSTM answered
We note your response to comment 5 in our letter dated October 10, 2014. It remains unclear how you determined that your product lines per your response to comment 2 are similar at the reportable segment level.

On page 3 of your November 10, 2014 response letter, you note that your business units, or operating segments, are structured around similar industrial processes.
Rest of the answer

Based on your more detailed description of each industrial process on page 6 of your November 10, 2014 response letter, it would appear varying types of products with differing end uses can result from the three main industrial processes used to transform aluminum. Further, it is unclear how you determined that

(a) aerospace customers are similar to transport customers; (b) packaging customers are similar to automotive customers; and (c) automotive customers are similar to rail customers. Finally, we note that the product lines have varying revenue trends. In this regard, you note from MD&A that A&T’s revenues were negatively impacted by a less favorable sales mix in aerospace and competitive pressure in the non-aerospace applications. P&ARP’s revenues were positively impacted by an improved product mix. AS&I’s revenues were positively impacted by increased automotive structures shipments offset by lower soft alloy volumes as competitive pressures remained strong. Please advise, or provide us with the enterprise-wide disclosures you intend to provide in future filings in accordance with IFRS 8.32.

In future filings, the

Company will include in its segment footnote additional entity-wide revenue information about products and services under the following format:

Entity-wide information about products and services (Revenue in millions)

Year ended

December 31,

Read in the reply
Note 2 – Summary of Significant Accounting Policies, page F-9 · 2.4 Presentation of the Operating Performance of each Operating Segment and of the Group, page F-10
SEC asked (3)
We note from your response to comment 6 in our letter dated August 19, 2014 that each of your business units is managed by a segment manager reporting directly to the CEO. Please explain to us the reasons why your organization is structured as it is.
Rest of the question

In this regard, tell us the business reasons for having one president responsible for Aerospace & Transportation, another responsible for Packing & Automotive Rolled Products, and a third responsible for Automotive Structures & Industry. In addition, describe to us the synergies associated with combining responsibility for the respective markets in the manner that you have.

CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 2 – Summary of Significant Accounting Policies, page F-9 · 2.4 Presentation of the Operating Performance of each Operating Segment and of the Group, page F-10
SEC asked (4)
We note on your website information by “Markets.” Please tell us how the products and services by “Markets” align with your three defined operating segments.
CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 4 – Operating Segment Information, page F-23
SEC asked (5)
We note from your response to comment 10 in our letter dated August 19, 2014, that you believe the products within each reportable segment are similar because they are all made from aluminum. Please provide us an analysis of how you considered the similarity of products using the guidance in IFRS 8.12 (i.e., nature of products and services, nature of production processes, type or class of customer, distribution
Rest of the question

methods, regulatory environments). To the extent the products are not similar, provide the disclosures required by IFRS 8.32 for your various products and services. We refer you to your description of the reportable segments beginning on page 28 of your most recent Form 20-F. S

CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 11 – Income Tax, page F-31
SEC asked (6)
We note the draft disclosure you provided in response to comment 11 in our letter dated August 19, 2014. Please expand this disclosure to explain the material causes for the changes between each period presented (e.g., changes in either tax rates or the mix of profits earned in different jurisdictions). Please refer to IAS 12.81(d) and .85 for guidance.
CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 12 – Earnings Per Share, page F-31
SEC asked (7)
We note your response to comment 12 in our letter dated August 19, 2014. To help us better understand your position that Class B ordinary shares do not meet the definition of shares per IAS 33.19 - .29 for purposes calculating basic earnings per share, please provide us with the revisions to your disclosures in Notes 12 and 18 that you intend to include in future filings.
Rest of the question

In addition, clarify in your response and disclosures whether the holders of Class B ordinary shares participate in profits if they do not request that the shares be repurchased.

CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 18 – Share Capital, page F-39
SEC asked (8)
We note your response to comment 14 in our letter dated August 19, 2014. As previously requested, please expand your disclosures here and/or within Note 30 to clarify the conversion terms of the Class B ordinary shares (i.e., automatically converted into Class A ordinary shares once the vesting conditions disclosed within Note 30 on page F-66 have been met or the specific facts and circumstances the Class B ordinary
Rest of the question

shares are convertible into Class A ordinary shares).

CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 21 – Pension and Other Post-Employment Benefit Obligations, page F-45
SEC asked (9)
We note your response to comment 15 in our letter dated August 19, 2014. While we note that you have provided some information on a disaggregated basis, it remains unclear the specific facts and circumstances you considered in determining the reconciliation disclosures required by IAS 19.140 at a more disaggregated level is not material based on the guidance in IAS 19.138.
Rest of the question

Please advise or confirm to us that you will provide the reconciliation listed in paragraph 140 of IAS 19 at a disaggregated level (i.e., geographical locations, plan type, et cetera).

CSTM answered

No numbered answer found in the reply. Read the reply ↗

Note 25 – Deferred Income Taxes, page F-61
SEC asked (10)
We note the draft disclosure you provided in response to comment 18 in our letter dated August 19, 2014. The draft disclosure appears to be a description of the process management uses to evaluate deferred tax assets.
Rest of the question

As previously requested in future filings, please expand your disclosure to provide investors with a discussion of the company-specific facts and circumstances that led to your conclusion that €153 million of deferred tax assets will not be used before expiration resulting in the assets not being recognized in accordance with IAS 1.125. Please provide the expanded disclosure either here or within Note 2.6.

CSTM answered

No numbered answer found in the reply. Read the reply ↗

SEC letter of Dec 31, 2014 ↗ no reply letter on EDGAR
Item 5. Operating and Financial Review and Prospects, page 53 · Results of Operations, page 59
SEC asked (1)
We note from your response to comment 2 in our letter dated October 10, 2014, that your CODM is provided with discrete financial information by business unit, by plants, and by product lines. In future filings, please consider including this more detailed information to better communicate the material factors impacting your operating results.
Rest of the question

Such factors include, for example, disclosure of the following:  the amount of the contribution to P&ARP’s revenues from the 27% increase in Body-in-White shipments, along with the amount by which the decrease in packaging products impacted segment revenues; and  in your analysis of management adjusted EBITDA, quantification of the impact of the increased shipments for the aerospace sector; the impact of weaker prices for your non-aerospace segments along with an explanation as to why prices are weaker; and the impact of the less favorable product mix in aerospace applications along with an explanation as to what the specific changes in aerospace product applications were. Refer to Items 303(a)(3)(i) and (iii) of Regulation S-K as well as Sections 501.04 and 501.12.b. of the Financial Reporting Codification for guidance.

CSTM answered

No reply letter found.

Note 4 – Operating Segment Information, page F-23
SEC asked (2)
We note your response to comment 5 in our letter dated October 10, 2014. It remains unclear how you determined that your product lines per your response to comment 2 are similar at the reportable segment level. On page 3 of your November 10, 2014 response letter, you note that your business units, or operating segments, are structured around similar industrial processes.
Rest of the question

Based on your more detailed description of each industrial process on page 6 of your November 10, 2014 response letter, it would appear varying types of products with differing end uses can result from the three main industrial processes used to transform aluminum. Further, it is unclear how you determined that (a) aerospace customers are similar to transport customers; (b) packaging customers are similar to automotive customers; and (c) automotive customers are similar to rail customers. Finally, we note that the product lines have varying revenue trends. In this regard, you note from MD&A that A&T’s revenues were negatively impacted by a less favorable sales mix in aerospace and competitive pressure in the non-aerospace applications. P&ARP’s revenues were positively impacted by an improved product mix. AS&I’s revenues were positively impacted by increased automotive structures shipments offset by lower soft alloy volumes as competitive pressures remained strong. Please advise, or provide us with the enterprise-wide disclosures you intend to provide in future filings in accordance with IFRS 8.32.

CSTM answered

No reply letter found.

Also in this review: company letter, Sep 15, 2014, company letter, Dec 3, 2014, closing letter, 2015-01-16

Form F-1

2012-12-31 to 2013-05-22 · 193 questions · 7 letters from the SEC, 1 from the company
No closing letter
Liquidity and cashAcquisitionsSegmentsGoodwill and impairmentNon-GAAP measuresDebtRisk factorsResults discussion (MD&A)RevenueLegal and contingenciesIncome taxesPensionsReserves and insuranceInventoryCybersecurityDerivatives and hedgingChinaClimateLeasesCritical estimates
SEC letter of Dec 31, 2012 ↗ no reply letter on EDGAR (the company may have answered in an amended filing)
General
SEC asked (1)
If you intend to respond to these comments with an amended draft registration statement, please submit it and any associated correspondence in accordance with the guidance we provide in the Division’s October 11, 2012 announcement on the SEC website at http://www.sec.gov/divisions/corpfin/cfannouncements/drsfilingprocedures101512.htm.
CSTM answered

No reply letter found.

General
SEC asked (2)
Please keep in mind that we may publicly post filing review correspondence in accordance with our December 1, 2011 policy (http://www.sec.gov/divisions/corpfin/cfannouncements/edgarcorrespondence.htm). If you intend to use Rule 83 (17 CFR 200.83) to request confidential treatment of information in the correspondence you submit on EDGAR, please properly mark that information in each of your confidential submissions
Rest of the question

to us so we do not repeat or refer to that information in our comment letters to you.

CSTM answered

No reply letter found.

General
SEC asked (3)
Please be advised that after the confidential draft review process is completed, and at the time of the public filing of your Form F-1, you must file on EDGAR all correspondence submitted in response to our comments regarding the draft submission and other correspondence.
CSTM answered

No reply letter found.

General
SEC asked (4)
We will process this filing and your amendments without price ranges. Since the price range triggers a number of disclosure matters, we will need sufficient time to process the amendment when it is included. Please understand that its effect on disclosure throughout the document may cause us to raise issues on areas not previously commented upon.
CSTM answered

No reply letter found.

General
SEC asked (5)
As indicated in the comment above, we note that you have omitted certain pricing-related information as well as other information from this filing. If you intend to rely on Rule 430A of Regulation C under the Securities Act of 1933, please note that Rule 430A does not allow for the omission prior to effectiveness of amounts that may be computed based on the maximum number of shares offered and the mid-point of the
Rest of the question

offering price range, or the number of shares to be offered. In addition, please confirm that you will not circulate copies of the registration statement or the preliminary prospectus until you include an estimated price range, maximum number of shares, dollar amounts dependent upon the offering price that are based on the mid-point of the offering price range, and all other information except information you may exclude in reliance upon Rule 430A.

CSTM answered

No reply letter found.

General
SEC asked (6)
Please tell us when you intend to identify the underwriter(s) of the offering. We would anticipate that your next amendment reflects the designation of the underwriter(s).
CSTM answered

No reply letter found.

General
SEC asked (7)
Prior to the effectiveness of your registration statement, please inform us as to whether or not the amount of compensation payable to the underwriters has received clearance by FINRA.
CSTM answered

No reply letter found.

General
SEC asked (8)
We encourage you to file all exhibits with your next amendment or otherwise furnish us drafts of your legal opinion and underwriting agreement. Please understand that we will need adequate time to review these materials before effectiveness.
CSTM answered

No reply letter found.

General
SEC asked (9)
Please provide us copies of any artwork that you intend to use as soon as possible for our review and comment. Please keep in mind that we may have comments on these materials and you should consider waiting for further comments before printing and circulating artwork.
CSTM answered

No reply letter found.

Prospectus Cover Page
SEC asked (10)
Please revise your disclosure to indicate that this is your first public offering and that prior to the IPO, no public market existed for your shares.
CSTM answered

No reply letter found.

Market and Industry Data, page iii
SEC asked (11)
We note your disclosure in this subsection; however, throughout the prospectus you provide various factual statements without indicating whether the source of the information is management’s belief, industry data, general articles or another source.
Rest of the question

Refer to the following examples:  “we are one of only two suppliers of aluminum products to the aerospace market with facilities in both the United States and Europe” [page 1];  the chart showing your leading market positions across your segments [page 10];  the new stretcher in the Ravenswood facility “is the most powerful stretcher in our industry” [page 11];  “Singen has improved our reputation in many product areas…” [page 84]; and  “aluminum rolled products… constitute almost 50 percent of all aluminum volumes used” [page 87]. Please note that the above list is not meant to be exclusive. Where disclosure requires it, please identify the information source(s) serving as basis for your disclosure. If this information is based upon management’s beliefs, please indicate that this is the case. If the information is based upon other sources, please provide us supplementally copies of these sources marked to highlight the information you are using to support your disclosures.

CSTM answered

No reply letter found.

Market and Industry Data, page iii
SEC asked (12)
If true, please confirm that all market and industry data represents information that is generally available to the public and was not commissioned by your for use in this registration statement. If you funded or were otherwise affiliated with any of the sources that you cite, please disclose this.
Rest of the question

Please file necessary consents or explain to us why you are not required to do so under Rule 436 of Regulation C and Section 7 of the Securities Act of 1933. We note, for example, the reference to certain “CRU” data starting on page 5 of the prospectus, statistical information provided by LMC Automotive, and the study done by Frost & Sullivan, both referenced on page 91. We may have additional comments after we review your response.

CSTM answered

No reply letter found.

Market and Industry Data, page iii
SEC asked (13)
At the end of the second paragraph of your disclosure please clarify the intended meaning of your statement that you “have converted historical data using [y]our financial methodology and forecast based on a constant exchange rate in line with the most recent year in the forecast” as it is not readily apparent.
Rest of the question

Please consider providing an example to illustrate your disclosure or reference a section in the filing where this disclosure is made.

CSTM answered

No reply letter found.

Basis of Presentation, page iii
SEC asked (14)
Refer to your disclosure in the penultimate paragraph. As you may not assign or disclaim any party’s responsibility under the federal securities laws for information included in a registration statement, please remove disclosure asking investors “to irrevocably acknowledge and agree” that Rio Tinto is not responsible for the 2009 and 2010 financial statements.
CSTM answered

No reply letter found.

Our Competitive Strengths, page 9 · Stable business model that delivers robust free cash flow across the cycle, page 11
SEC asked (15)
Please further explain how your cash flows are countercyclical and how working capital is impacted when cash flow is replaced with inventory purchases. In addition, please consider providing comparative quantitative disclosure of your cash flows, demonstrating their consistency and stability, or include a reference where such information is disclosed in the filing.
CSTM answered

No reply letter found.

Corporate History and Information, page 14
SEC asked (16)
Please revise your disclosure here to indicate the percentage of equity ownership to be held by the public stockholders following the offering.
CSTM answered

No reply letter found.

Corporate History and Information, page 14
SEC asked (17)
In connection with the offering, you will convert into a Dutch public limited liability company. Please disclose whether there will be any impact to your financial statements as a result of this conversion.
CSTM answered

No reply letter found.

Summary of Consolidated Historical Financial Data, page 17
SEC asked (18)
In regards to your presentation of Segment Adjusted EBITDA and Management Adjusted EBITDA, please address the following:  Please expand your disclosures to clarify why you believe both of these Adjusted EBITDA amounts are useful performance measures pursuant to Item 10(e)(1)(i)(C) of Regulation S-K;  Your disclosures on page 19 indicate that the primary use for Management Adjusted EBITDA is for debt covenant
Rest of the question

compliance purposes whereas Segment Adjusted EBITDA is primarily used to measure the performance of your segments. Based on what appears to be the primary purpose for presenting Management Adjusted EBITDA, it is not clear why you would present this amount for each segment beginning on page 4. In a similar manner, it is not clear why you would focus on Management Adjusted EBITDA in your overview section beginning on page 2. Please advise;  You present Segment Adjusted EBITDA and Management Adjusted EBITDA per ton amounts. Please present the comparable IFRS amounts pursuant to Item 10(e)(1)(i)(a) of Regulation S-K;  Please disclose how you calculate the amount of the metal price lag adjustment to arrive at Management Adjusted EBITDA;  The definition of Management Adjusted EBITDA provided on page 19 does not appear to include the impact of cost savings. In this regard, it is not clear how you determined it was appropriate to present alternative Management Adjusted EBITDA amounts in note (j) which further adjusts for this amount. Please advise or remove these amounts; and  Given that you incurred exceptional consulting costs in each of the three years ended December 31, 2011, please clarify how you determined it was appropriate to characterize these costs as exceptional. Please see Compliance and Disclosures Interpretation 102.03 which is available on our website at http://www.sec.gov/divisions/corpfin/guidance/nongaapinterp.htm.

CSTM answered

No reply letter found.

Summary of Consolidated Historical Financial Data, page 17
SEC asked (19)
In addition to Segment Adjusted EBITDA and Management Adjusted EBITDA, you present EBITDA in certain places including on page F-18. Please confirm that these EBITDA amounts represent EBITDA as is commonly defined. If not, please retitle these measures. Please also ensure that you are using consistent terminology to describe your EBITDA amounts throughout the filing.
Rest of the question

For example, if the EBITDA amounts presented on page F-18 actually represent Management Adjusted EBITDA, you should refer to it as Management Adjusted EBITDA rather than EBITDA.

CSTM answered

No reply letter found.

Risk Factors, page 21 · A portion of our revenues is derived from international operations…, page 24
SEC asked (20)
If there are material risks unique to each country that is material to your operations or expansion, please include them here or as separate risks.
CSTM answered

No reply letter found.

We may not be able to adequately protect proprietary rights to our technology, page 32
SEC asked (21)
Since you have manufacturing facilities and a growing presence in China, disclose that China has provided less protection to a company’s intellectual property than the United States or the Netherlands. Failure to protect our information against cyber-attacks or information security breaches could have a material adverse effect on our business, page 33
CSTM answered

No reply letter found.

We may not be able to adequately protect proprietary rights to our technology, page 32
SEC asked (22)
Please tell us what consideration have you given to including disclosure in accordance with the guidance provided by the Division of Corporation Finance’s Disclosure Guidance Topic No.2 , to address, among other things, (i) the adequacy of preventative actions taken to reduce cybersecurity risks, (ii) to the extent applicable, the risks resulting from outsourcing of any functions that have material cybersecurity
Rest of the question

risks, (iii) risks related to cyber incidents that may remain undetected for an extended period of time, and (iv) whether you have obtained relevant insurance coverage.

CSTM answered

No reply letter found.

Product liability claims against us could result in significant costs. . ., page 34
SEC asked (23)
Disclose whether you possess product liability insurance that you believe to be adequate given your exposure to product liability lawsuits.
CSTM answered

No reply letter found.

Our operations present significant risk of injury or death, page 34
SEC asked (24)
It is unclear whether hazards associated with your heavy industrial activities have ever resulted in incidents that disrupt your operations or expose you to significant losses or liabilities. Please clarify and, to the extent applicable, quantify the impact of any such incidents.
CSTM answered

No reply letter found.

We are principally owned by Apollo, Rio Tinto and FSI . . . , page 35
SEC asked (25)
Please be more specific about the “certain board representation rights” that Apollo, Rio Tinto and FSI will have under the Amended and Restated Shareholders Agreement. In particular, we note that Apollo will be entitled to appoint a majority of the directors of the company, provided that certain conditions are met. Clarify the extent to which any board members will be elected by vote of the public shareholders.
CSTM answered

No reply letter found.

We are a foreign private issuer . . . , page 36
SEC asked (26)
We note that you intend to rely on exemptions from “certain” of the NYSE corporate governance rules. Please clarify which rules you will rely on exemptions from as a foreign private issuer.
CSTM answered

No reply letter found.

We are a foreign private issuer . . . , page 36
SEC asked (27)
Clarify that foreign private issuers are exempt from certain U.S. securities law requirements applicable to U.S. domestic issuers, including the requirement to distribute a proxy statement pursuant to Exchange Act Section 14 in connection with the solicitation of proxies for shareholders meetings.
CSTM answered

No reply letter found.

We do not comply with all of the provisions of the Dutch Corporate Governance Code, page 36
SEC asked (28)
In this risk factor, briefly identify the principal Dutch Corporate Governance Code provisions with which you do not intend to comply. Alternatively, provide a reference to where in the registration statement an investor may find a more detailed discussion of this information (i.e. page 132). Provisions of our organizational documents and Dutch corporate law may impede or discourage a takeover…, page 38
CSTM answered

No reply letter found.

We do not comply with all of the provisions of the Dutch Corporate Governance Code, page 36
SEC asked (29)
Refer to the disclosure requirements of Item 10.B.7 in Part I of Form 20-F. Please consider expanding your “Description of Capital Stock” disclosure on page 125 to include under a separate descriptive subheading disclosure similar to this risk factor disclosure. In connection with this offering, we will convert from a Dutch private limited company to a Dutch public limited liability company, page 40
CSTM answered

No reply letter found.

We do not comply with all of the provisions of the Dutch Corporate Governance Code, page 36
SEC asked (30)
In an appropriate section of the filing, please explain the implications resulting from converting from a private to a public Dutch limited company. In addition, please expand this risk factor by discussing the material differences between the rights of shareholders and responsibilities of the members of the board of directors between an U.S. and a Dutch company.
CSTM answered

No reply letter found.

Use Of Proceeds, page 44
SEC asked (31)
As indicated in Items 3.C.1 and 2 in Part I of Form 20-F, please revise your disclosure to provide a breakdown of each principal intended use of the offering proceeds in order of priority, to the extent that the anticipated proceeds may not be sufficient to fund all of the proposed purposes.
Rest of the question

In addition, since you disclose that the anticipated proceeds may be used to fund acquisition opportunities, please discuss, to the extent relevant, the status of any contemplated acquisitions. If you have no specific plans for the proceeds, then please discuss the principal reasons for your offering. Refer to Item 3.C.1 and 3 in Part I of Form 20F.

CSTM answered

No reply letter found.

Capitalization, page 46
SEC asked (32)
The capitalization table is not supposed to function as a balance sheet. Accordingly, delete the “cash and cash equivalents” item.
CSTM answered

No reply letter found.

Capitalization, page 46
SEC asked (33)
Please clearly show in the notes how you computed each pro forma and pro forma as adjusted amount, including a discussion of any significant assumptions and estimates used to arrive at the amounts.
CSTM answered

No reply letter found.

Dilution, page 47
SEC asked (34)
With a view towards disclosure, please explain to us whether your dilution analysis assumes the underwriters’ exercise of the overallotment option.
CSTM answered

No reply letter found.

Our History and Corporate Structure, page 48
SEC asked (35)
If the length of the company’s life is not indefinite, please identify the corporate life term in the filing. Refer to Item 4.A.2. in Part I of Form 20-F.
CSTM answered

No reply letter found.

Our History and Corporate Structure, page 48
SEC asked (36)
Please disclose here or in an appropriate section of the registration statement, the name of agent in the United States, as host country. Please see Item 4.A.3 in Part I of Form 20-F.
CSTM answered

No reply letter found.

Corporate Structure, page 49
SEC asked (37)
Please consider revising your graphical presentation to include your significant subsidiaries by name, identifying also their country of incorporation and proportion of ownership percentage. Refer to Item 4.C in Part I of Form 20-F.
CSTM answered

No reply letter found.

Management’s Discussion and Analysis, page 52 · Results of Operations, page 58
SEC asked (38)
For both the consolidated and segment results of operations discussions, please quantify the impact of each factor when multiple factors contribute to material changes in a line item as well as discuss the underlying business reasons for material changes between periods in line items.
Rest of the question

For example, in your results of operations discussion for the Aerospace & Transportation segment for the six months ended June 30, 2012 compared to the six months ended June 30, 2011, you state that Segment Adjusted EBITDA increased by 61% or 22 million Euros due to increased prices and higher volumes and the positive effects of the operational turnaround at the Ravenswood facility. These increases were offset by inflation and currency effects. In addition to separately quantifying the impact of each of these factors, you should discuss the underlying business reasons for each of these factors. For example, you should give additional insight as to what caused an increase in sales volumes. Please revise your discussion accordingly. Refer to Items 303(a)(3)(i) and (iii) of Regulation S-K as well as Financial Reporting Codification 501.04.

CSTM answered

No reply letter found.

Management’s Discussion and Analysis, page 52 · Results of Operations, page 58
SEC asked (39)
It appears that your results of operations could be materially impacted by metal prices, foreign currency exchange rates and interest rates which you attempt to minimize using financial instruments. Please specifically discuss the impact of these financial instruments on your results of operations for each period presented if material.
Rest of the question

Please address the specific underlying reasons such instruments impacted each year by the amounts disclosed. For example, if there are increases in metal prices which have impacted your results of operations, you should discuss why the increase was not offset by your derivative contracts, which may be due to your positions being too small relative to your needs. In addition, please also discuss any cases in which your strategies and assumptions resulted in adverse impacts.

CSTM answered

No reply letter found.

Management’s Discussion and Analysis, page 52 · Results of Operations, page 58
SEC asked (40)
Subsequent to your results of operations discussion by segment, please provide a discussion of the business reasons for fluctuations in the Eliminations and Other column presented in your segment note to the financial statements.
CSTM answered

No reply letter found.

Covenant Compliance and Financial Ratios, page 71
SEC asked (41)
Please discuss the terms of all significant covenants that you are subject to in your debt agreements, including any required ratios/amounts. Please also clearly state whether you were in compliance with all covenants.
Rest of the question

For example, it appears that you are still subject to the cumulative cash outflow covenant related to your ABL Facility which is disclosed on page F-60 and for which you were not in compliance with for the period January 1, 2011 through December 31, 2011. Please disclose the actual ratios/amounts as of each reporting date for any material debt covenants for which it is reasonably likely that you will not be able to meet, along with the specific computations used to arrive at the actual ratios/amounts with corresponding reconciliations to US GAAP amounts. See Sections I.D

CSTM answered

No reply letter found.

Interpretation 102.09 which is available on our website at · Liquidity and Capital Resources, page 73
SEC asked (42)
Given your significant foreign operations, please enhance your liquidity disclosure to address the following:  Disclose the amount of cash and short-term investments held by foreign subsidiaries as compared to your total amount of cash and short-term investments as of June 30, 2012;  Disclose whether or not you would need to accrue and pay taxes if these amounts are repatriated;  Disclose, if true, that you do
Rest of the question

not intend to repatriate these amounts; and  Disclose the nature and extent of any legal or economic restrictions on the ability of your subsidiaries to transfer funds to you in the form of cash dividends, loans or advances and the impact such restrictions have had or are expected to have on your ability to meet cash obligations. Refer to Item 5(b) of the Form 20-F.

CSTM answered

No reply letter found.

Interpretation 102.09 which is available on our website at · Liquidity and Capital Resources, page 73
SEC asked (43)
You state that your primary sources of cash have historically been cash flows from operating activities and funding and borrowings from external parties and related parties. You believe your cash on hand, cash flows from operations, and availability under Term Loan and revolving credit facilities will enable you to meet your working capital, capital expenditures, debt service and other funding requirements for the
Rest of the question

foreseeable future. Given that you have not generated cash flows from operations in each of the two years ended December 31, 2011 or the six months ended June 30, 2012, it is not clear how you determined that this is one of your primary sources of cash. Please further clarify in your disclosures.

CSTM answered

No reply letter found.

Interpretation 102.09 which is available on our website at · Liquidity and Capital Resources, page 73
SEC asked (44)
You had total liquidity of 308 million Euros which is comprised of 113 million Euros of cash and cash equivalents and 195 million Euros of undrawn credit facilities. The term loan facility provided by Apollo and FSI also provides for an additional 96 million of uncommitted loans in the event of your insolvency.
Rest of the question

It is not clear if the undrawn credit facilities amount of 113 million Euros includes this additional 96 million Euros. Please clarify in your disclosures. If this amount is included, please explain how you determined this is appropriate given that it only appears to be available in the event of insolvency.

CSTM answered

No reply letter found.

Interpretation 102.09 which is available on our website at · Liquidity and Capital Resources, page 73
SEC asked (45)
Please expand your liquidity and capital resources discussion to address your exposure to margin calls.
CSTM answered

No reply letter found.

Financing Arrangements, page 76 · Historical Capital Expenditures, page 76
SEC asked (46)
There appears to be a typographical error in the heading of the third column. It appears that this column relates to the year ended December 31, 2011. Please revise as necessary.
CSTM answered

No reply letter found.

Financing Arrangements, page 76 · Historical Capital Expenditures, page 76
SEC asked (47)
Please revise your disclosure to quantify the amount of the capital expenditures required in connection with your currently ongoing projects. See Item 4.A.6. in Part I of Form 20-F.
CSTM answered

No reply letter found.

Contractual Obligations, page 76
SEC asked (48)
Please revise your table of contractual cash obligations to include estimated interest payments on your borrowings. Because the table is aimed at increasing transparency of cash flows, we believe these payments should be included in the table. Please also disclose any assumptions you made to derive these amounts in a footnote to the table.
CSTM answered

No reply letter found.

Business, page 79 · Our Operating Segments, page 81
SEC asked (49)
Please note that the information required to be provided in accordance with Item 4.B.2. in Part I of Form 20-F must be provided for each of the last three financial years for each category of activity as well as each geographic market in which you complete. Please revise your disclosure accordingly.
CSTM answered

No reply letter found.

Aerospace & Transportation Operating Segment, page 82
SEC asked (50)
In the first paragraph, please revise your disclosure to elaborate on the nature of your services “designed to optimize customer operations and reduce costs.”
CSTM answered

No reply letter found.

Aerospace & Transportation Operating Segment, page 82
SEC asked (51)
You state that the aerospace products are typically subject to long qualification. Please explain whether these products would have to be qualified by your customers or by a designated governmental agency, and provide an objective range of what may be considered a long qualification period.
CSTM answered

No reply letter found.

Aerospace & Transportation Operating Segment, page 82
SEC asked (52)
To the extent possible, please provide an objective measure demonstrating the EBITDA improvements due to your turn-around plan in the Ravenswood facility.
CSTM answered

No reply letter found.

Our Industrial Facilities and Offices, page 98
SEC asked (53)
With respect to each facility discussed, please expand your disclosure to indicate current production capacity and utilization rate. To the extent that you plan to construct, expand or improve any of these facilities, please discuss the nature and reason for these plans, the estimated amount of expenditures and the methods you plan to finance these plans, indicating also estimated dates of start and completion of
Rest of the question

these projects. Refer to Item 4.D. in Part I in Form 20-F.

CSTM answered

No reply letter found.

Raw Materials and Supplies, page 100 · Our Customers, page 100
SEC asked (54)
With respect to your multi-year supplier and customer contracts, please tell us what consideration you have given to filing these contracts as exhibits to your registration statement. In this regard, we also note disclosure related to the metal supply agreements on page 119. Please see Item 8 of Form F-1 and Item 601(b)(10) of Regulation S-K.
CSTM answered

No reply letter found.

Trademarks, Patents, License and IT, page 102
SEC asked (55)
With a view towards disclosure, please tell us whether your business is dependent upon any of your patent families. See also Item 4.B.6 in Part I in Form 20-F. We note your disclosure that no single patent or patent application is critical to your business.
CSTM answered

No reply letter found.

Governmental Regulation and Environmental, Health and Safety Matters, page 102
SEC asked (56)
Please expand your disclosure to discuss the effects that REACH may have on your operations. Refer to “Regulations regarding carbon dioxide emissions…” risk factor on page 28. In addition, please identify the regulatory body overseeing environmental compliance in the jurisdictions where a material portion of your business is conducted. See Item 4.B.8 in Part I in Form 20-F.
CSTM answered

No reply letter found.

Litigation and Legal Proceedings, page 103
SEC asked (57)
Please disclose the aspects of your business exposing you to asbestos related claims.
CSTM answered

No reply letter found.

Management, page 104 · Executive Officers and Board of Directors, page 104
SEC asked (58)
To the extent that any director or member of senior manager was selected as such pursuant to any arrangement or understanding with Apollo, Rio Tinto or FSI, pursuant to the Shareholders Agreement or otherwise, please ensure that your disclosure makes that clear, as required by Item 6.A.5. of Form 20-F.
CSTM answered

No reply letter found.

Board Structure, page 108
SEC asked (59)
For each director, please indicate the date when their respective current term of office expires. See Item 6.C.1 in Part I in Form 20-F.
CSTM answered

No reply letter found.

Compensation of Non-Employee Directors and Officers, page 110
SEC asked (60)
Refer to Item 6.C.2 in Part I of Form 20-F. If there are no director service contracts providing post-employment termination benefits, please include an appropriate negative statement.
CSTM answered

No reply letter found.

Officer Compensation, page 111
SEC asked (61)
You state that the tabular disclosure sets forth the “approximate” remuneration paid to your executive officers in 2011. With a view towards disclosure, please tell us why you are unable to disclose the actual compensation paid to your executive officers.
CSTM answered

No reply letter found.

Long Term Incentive Cash Plan, page 111
SEC asked (62)
Please tell us why grants of cash awards under the long term incentive cash plan are not disclosed in the compensation table. In this regard, we note that 50 of your senior employees received such grants in 2011.
CSTM answered

No reply letter found.

Management Equity Plan, page 113
SEC asked (63)
Please revise to provide brief disclosure of the material terms and conditions of MEP.
CSTM answered

No reply letter found.

Management Equity Plan, page 113
SEC asked (64)
Reference to “Constellium Management GmbH” at the end of the third paragraph on page 114 appears in error. Please revise.
CSTM answered

No reply letter found.

Management Equity Plan, page 113
SEC asked (65)
Refer to your disclosure in the fourth paragraph on page 114. With a view towards disclosure, please explain to us how the amount of each grant under MEP is determined, and whether any performance-vesting tranches vested at the end of 2011.
Rest of the question

In addition, please tell us whether these tranches represent compensation related to performance and as such, whether related disclosure should be included in the Officer Compensation section.

CSTM answered

No reply letter found.

Management Equity Plan, page 113
SEC asked (66)
In the third paragraph of your “Our History” discussion on page 48 you state that the Management KG shares are voted “in the same manner as, and in proportion to the respective equity ownership amounts of, Apollo, Rio Tinto and FSI.” Please supplement your disclosure here to explain how this proportional voting is achieved.
CSTM answered

No reply letter found.

Principal and Selling Shareholders, page 115
SEC asked (67)
In light of the disclosure requirements of Item 6.E.1 in Part I of Form 20-F, please tell us what consideration you have given to disclosing here the executive officers’ MEP participation interests.
CSTM answered

No reply letter found.

Principal and Selling Shareholders, page 115
SEC asked (68)
Given the U.S. address disclosed at the end of footnote (1), please state the number of record holders in the United States and the corresponding percentage of the outstanding shares currently held in the United States. See Item 7.A.2 in Part I of Form 20-F.
CSTM answered

No reply letter found.

Description of Capital Stock, page 125
SEC asked (69)
Please include disclosure describing the material differences among, the Class A, Class B1 and Class B2 ordinary shares.
CSTM answered

No reply letter found.

Description of Capital Stock, page 125
SEC asked (70)
Please expand your disclosure to incorporate (i) the requirements of Item 10.B.2. in Part I of Form 20-F, including, but not limited to, a summary of the applicable provisions of your articles of association regarding a director’s power in the absence of an independent quorum to vote compensation to themselves or any members of their body; and (ii) the requirements of paragraph (b) of Item 10.B.3 in Part I of Form
Rest of the question

20-F if cumulative voting in the election of directors is permitted.

CSTM answered

No reply letter found.

Description of Capital Stock, page 125
SEC asked (71)
Refer to Item 10.B.9 in Part I of Form 20-F. Under a separate descriptive heading, please disclose the material differences between Dutch laws and the laws of United States, explaining also the effect that the applicable law would have on the noted disclosure items.
CSTM answered

No reply letter found.

Liquidation Rights and Dissolution, page 130
SEC asked (72)
Please make clear any limits to the liabilities of shareholders, including whether shareholders may be liable for the debts of the corporation beyond the amount of distributions they receive.
CSTM answered

No reply letter found.

Dutch Corporate Governance Code, page 131
SEC asked (73)
Supplementally advise, with a view to disclosure, how the “nature of your business” justifies your not following the Dutch Corporate Governance Code provision requiring that a majority of board members be non-executive directors who are independent.
CSTM answered

No reply letter found.

Underwriting, page 135
SEC asked (74)
Please revise your disclosure to include each underwriter’s address. See Item 9.B.1. in Part I of Form 20-F.
CSTM answered

No reply letter found.

Ordinary Shares Eligible for Future Sale, page 136 · Regulation S, page 136
SEC asked (75)
Revise your first sentence to state that Regulation S under the Securities Act provides that offers or sales, and reoffers or resales, of securities may occur without registration under Section 5 of the Securities Act provided that the offer or sale is made in an offshore transaction and no directed selling efforts are made in the U.S. (as those terms are defined in Regulation S) subject to certain other conditions.
CSTM answered

No reply letter found.

Material U.S. Federal Income Tax Consequences, page 138
SEC asked (76)
We note your statement that, while you believe that you will not be a passive foreign investment company (“PFIC”) for the current taxable year or in the foreseeable future, because PFIC status is a fact-intensive determination, “it is possible that [you] may become a PFIC due to changes in [your] income or asset composition or a decline in the market value of [your] equity” and “no assurance can be given that [you]
Rest of the question

are not, have not been, or will not become, classified as a PFIC.” Accordingly, provide a risk factor that briefly discusses the risks to your U.S. holders should you be classified as a PFIC.

CSTM answered

No reply letter found.

Material U.S. Federal Income Tax Consequences, page 138
SEC asked (77)
Expand upon your PFIC discussion by describing the various elections that a U.S. holder may be able to take to mitigate the adverse consequences of PFIC tax status. Include in this discussion whether, should you be classified as a PFIC, you do not intend to furnish the information necessary for U.S. holders to make qualified electing fund elections that would provide some relief from the PFIC rules.
CSTM answered

No reply letter found.

Enforcement of Judgments, page 154
SEC asked (78)
Please revise your discussion to:  consider moving the substance of the risk “United States civil liabilities may not be enforceable against us” on page 40 to this heading;  make clear whether shareholders may originate actions in the Netherlands to enforce liabilities against you based upon the U.S. federal securities laws. Refer to Item 101(g)(1) of Regulation S-K.
CSTM answered

No reply letter found.

Where You Can Find Additional Information, page 154
SEC asked (79)
Disclose that your Form 20-F annual report will be due four months from the end of each fiscal year.
CSTM answered

No reply letter found.

Financial Statements · Financial Statements for the Period Ended June 30, 2012
SEC asked (80)
Please address the comments below related to the financial statements for the year ended December 31, 2011 in your interim financial statements as well to the extent applicable.
CSTM answered

No reply letter found.

Unaudited Condensed Interim Consolidated Financial Statements of Changes in Equity, page F-5
SEC asked (81)
Please disclose the nature of the line item described as allocation of previous year net loss.
CSTM answered

No reply letter found.

Notes to the Financial Statements · Note 22. Related Party Transactions, page F-26
SEC asked (82)
You disclose related party revenues for the year ended December 31, 2011 on page F- 74. Please confirm that you did not have any related party revenues during the six months ended June 30, 2012 or June 30, 2011.
CSTM answered

No reply letter found.

Financial Statements for the Year Ended December 31, 2011
SEC asked (83)
It appears that you refer to minority interests instead of noncontrolling interests pursuant to IAS 27.4 in certain places, including page F-32. Please revise as necessary.
CSTM answered

No reply letter found.

Consolidated Income Statement, page F-28
SEC asked (84)
Please present basic and diluted earnings per share amounts from continuing operations on the face of your income statement. Refer to IAS 33.66.
CSTM answered

No reply letter found.

Consolidated Statement of Comprehensive Income (Loss), page F-29
SEC asked (85)
Please disclose the amount of income tax related to each component of other comprehensive income either in the statement or in the notes to the financial statements. Refer to IAS 1.90.
CSTM answered

No reply letter found.

Consolidated Statement of Changes in Equity, page F-31
SEC asked (86)
Please present a reconciliation of each component of other comprehensive income in the statement or in the notes to the financial statements. Refer to IAS 1.106A, 1.106(d)(ii), and paragraph BC74A of IAS 1.
CSTM answered

No reply letter found.

Consolidated Statement of Cash Flows, page F-32
SEC asked (87)
Please help us understand how you determined it was appropriate to begin your determination of net cash flows from operating activities with net loss before minority interests and discontinued operations pursuant to IAS 7.18.
CSTM answered

No reply letter found.

Consolidated Statement of Cash Flows, page F-32
SEC asked (88)
You present changes linked to discontinued activity in cash flows from financing activities. Please also present any net cash flows attributable to operating and investing activities of discontinued operations. Refer to IFRS 5.33(c).
CSTM answered

No reply letter found.

Consolidated Statement of Cash Flows, page F-32
SEC asked (89)
Please tell us whether any liability amounts as of December 31, 2010, December 31, 2011, or June 30, 2012 include amounts owed related to property, plant and equipment. To the extent that you do have liabilities outstanding as of the end of any of these periods related to property, plant and equipment, please confirm that these amounts are excluded from your determination of cash flows of investing activities until
Rest of the question

the period in which a cash payment is made. Refer to IAS 7.16(a).

CSTM answered

No reply letter found.

Consolidated Statement of Cash Flows, page F-32
SEC asked (90)
Please tell us how you determined it was appropriate to present cash flows related to factoring, term-loan, and other loans on a net rather than gross basis pursuant to IAS 7.22 through 24.
CSTM answered

No reply letter found.

F-36 · Goodwill, page F-36
SEC asked (91)
Please clarify what your cash-generating units are and expand your disclosures pursuant to IAS 36.134 and 135 to the extent applicable.
CSTM answered

No reply letter found.

Revenue Recognition, page F-38
SEC asked (92)
Please separately disclose the amount of revenues recognized for services provided related to tolling arrangements. Refer to IAS 18.35(c).
CSTM answered

No reply letter found.

Deferred Tooling Revenue and Related Costs, page F-39
SEC asked (93)
In a similar manner to the disclosures in the financial statements for the year ended December 31, 2010 on page F-99, please expand your disclosures to discuss how you account for tooling revenue and related costs. Please also provide the disclosures called for by IAS 11.39 through 45.
CSTM answered

No reply letter found.

Leases, page F-41 · Constellium as the Lessor, page F-41
SEC asked (94)
Please provide the disclosures required by IAS 17.47 and 48 regarding your finance lease arrangements.
CSTM answered

No reply letter found.

Note 2.6. Judgments in Applying Accounting Policies and Key Sources of Estimation · Uncertainty, page F-45
SEC asked (95)
We remind you that IAS 1.129 states that the disclosures in IAS 1.125 should help users of the financial statements understand the judgments that you make about the future and other sources of estimation uncertainty. Your current disclosures appear to only provide a general discussion and in some cases appear to only repeat disclosures provided in Note 2.5. Please refer to the examples provided in IAS 1.125.
Rest of the question

For example, it would appear that you should provide a more detailed discussion regarding the assumptions used in determining the defined benefit obligation and net pension costs. You should consider disclosing how you derive estimates and related assumptions, how accurate those estimates/assumptions have been in the past, and whether the estimates/assumptions are reasonably likely to change in the future. Please also consider providing quantitative as well as qualitative information when information is reasonably available.

CSTM answered

No reply letter found.

Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-46
SEC asked (96)
The sum of receivables on your statement of financial position for Engineered Aluminum Products as of December 31, 2010 appears to be approximately 200 million Euros higher than the amounts reflected in the table on page F-47 when taking the sum of long-term loans receivable, trade receivables and other, and short-term loans receivable.
Rest of the question

Please help us better understand why there would be such a significant difference.

CSTM answered

No reply letter found.

Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-46
SEC asked (97)
You disclose on page 66 that an impairment charge was recorded related to property, plant and equipment and intangible assets during 2010 as a result of the pending acquisition. It appears the fair value of property, plant and equipment was further reduced by an additional 123 million Euros in recording the acquisition on January 4, 2011.
Rest of the question

Please help us better understand what resulted in the additional reduction in value when recording the acquisition.

CSTM answered

No reply letter found.

Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-46
SEC asked (98)
Please expand your disclosures regarding acquired receivables, contingent liabilities and goodwill recorded related to the acquisition pursuant to IFRS 3.60. Refer to paragraphs B64(h),(j) and (k) of IFRS 3.
CSTM answered

No reply letter found.

Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-46
SEC asked (99)
On January 4, 2011, Rio Tinto International Holdings Limited subscribed in class “A” shares to bring their equity holdings into Omega Holdco B.V., which is now referred to as Constellium Holdco B.V., to 39%. On this date, Constellium Holdco B.V. also acquired substantially all of the entities and business of Rio Tinto Engineered Aluminum Products from Rio Tinto International Holdings Limited.
Rest of the question

Please tell us the form of consideration paid for the acquisition and how you differentiated between the consideration paid for the acquisition versus the consideration paid for the subscription of shares. Note 10. Earnings Per Share, page F-51 100. Please disclose instruments (including contingently issuable shares) that could potentially dilute basic earnings per share in the future but were not included in the calculation of diluted earnings per share because they were antidilutive for the period presented. Refer to IAS 33.70(c). Note 11. Property, Plant and Equipment, page F-52 101. Please disclose the amount of contractual commitments for the acquisition of property, plant and equipment pursuant to IAS 16.71(c). 102. The majority of your property, plant and equipment at December 31, 2011 is construction work in progress and therefore not currently being depreciated. Please disclose the nature of the items that are included in construction work in progress and when you expect to place these assets in service. Note 16. Trade Receivables and Other Factoring Arrangements, page F-56 103. In regards to your factoring arrangements, please address the following:  In December 2011, you amended the French factoring agreement to allow the partial derecognition of some receivables. Your disclosures on page F-17 indicate that you also amended the French factoring agreement in June 2012. Please disclose the nature of the amendments made which resulted in the partial derecognition of receivables;  Please provide the disclosures required by IFRS 7.13(c) and (d) including the total carrying amount of the original assets, the amount of assets you continue to recognize, and the carrying amount of associated liabilities in factoring arrangements in which you continue to recognize the assets to the extent of continuing involvement; and  Please disclose how you present cash flows related to factoring arrangements. Please specifically address any differences between those arrangements in which you derecognize receivables versus those that you do not. 104. Please provide additional clarity in your disclosures regarding the extent to which your arrangements resulted in derecognition of receivables versus those for which the sales of receivables did not qualify for derecognition. The borrowings amount disclosed on page F- 17 as of June 30, 2012 appears to indicate that a significant portion did not qualify for derecognition. Note 19. Pension Liabilities and Other Post-Retirement Healthcare Obligations, page F-61 105. Please provide the following disclosures:  The actual return on plan assets pursuant to IAS 19.120A(m); and  The estimated expected contributions to be paid to the plan pursuant to IAS 19.120(q). Note 20. Provisions, page F-66 106. Please expand your disclosures pursuant to IAS 37.85 to address the expected timing of outflows related to the provisions recorded. Please also describe any uncertainties about the amount or timing as well as the major assumptions made concerning future events in arriving at the provision amount. 107. In regards to the claims and lawsuits in France that your businesses have been subject to related to occupational diseases, please consider expanding your disclosures pursuant to Question 3 of SAB Topic 5:P, which would include disclosure of the number of claims pending at each balance sheet date, the number of claims filed for each period presented, the number of claims dismissed, settled, or otherwise resolved for each period, and the average settlement amount per claim. The disclosures should address historical and expected trends in these amounts and their reasonably likely effects on operating results and liquidity. Note 21. Share Capital, page F-67 108. Please provide us with an analysis of any equity issuances since January 1, 2012 as well as any planned equity issuances. For each transaction,  identify the parties, including any related parties;  the purpose of the issuance;  how you accounted or will account for the issuance;  the nature of any consideration;  the fair value and your basis for determining the fair value; and o Indicate whether the fair value was contemporaneous or retrospective. o To the extent applicable, reconcile the fair values you used for equity transactions to the fair value indicated by the anticipated IPO price. For equity transactions in which your Board of Directors estimated the fair value, please provide us with a detailed explanation of the significant factors, assumptions, and methodologies used in determining fair value. We will not be able to complete our evaluation of your response until the IPO range has been disclosed. 109. Class B2 Shares can be converted into Class B1 shares that give the same economic rights as Class A shares upon vesting. Please clarify what economic rights, if any, Class B2 Shares have prior to converting to Class B1 Shares. Please also clarify whether Class B1 and B2 shares have any rights to dividends. Note 23. Financial Instruments, page F-71 110. Please provide the disclosures called for by IFRS 7.9 through 11 regarding changes in the fair value of your derivative assets and liabilities attributable to changes in credit risk. Note 24. Commitments and Contingencies, page F-73 111. For any matter for which there is a possible or present obligation that may, but probably will not, require an outflow of resources, please provide the disclosures called for by IAS 37.86. Note 26. Operating Segment Information, page F-75 112. Please separately present each significant reconciling item in your reconciliations, including amounts related to eliminations or reversal of transactions between segments and head office or regional administrative centers. Refer to IFRS 8.28. 113. Please provide the disclosures required by IFRS 8.34 regarding major customers. 114. Please help us understand why you are presenting a subtotal for EBITDA in the reconciliation between Segment Adjusted EBITDA and Net Loss. Alternatively, please remove this line item from your reconciliation. Note 30. Share Equity Plan, page F-80 115. During 2011, some beneficiaries left and new participants were elected to the plan. Please disclose how you determined the price at which the new beneficiaries acquired shares, including if you determined it was the fair value on the transaction date, as well as the corresponding accounting for the issuance of the shares pursuant to IFRS 2. Note 32. Subsequent Events, page F-82 116. Please provide the disclosures required by IAS 10.17 through 22 as applicable. Your disclosures should include the date when the financial statements were authorized to be issued and who gave that authorization. Waiver in Relation to the Constellium Rolled Products – Ravenswood LLC’s ABL Facility, page F-82 117. In regards to the waiver received related to the ABL Facility, please address the following:  Please disclose the terms of the waiver, including when it expires; and  Please disclose the potential impact on your liquidity and capital resources of not being able to comply with these covenants and obtain waivers of compliance in the future. Financial Statements for the Years Ended December 31, 2010 and December 31, 2009 118. Please address the above comments as applicable. Note 2. Summary of Significant Accounting Policies Allocations from Owners, page F-97 119. Please clearly disclose, if true, that the financial statement provided reflect all of the costs of doing business related to these operations, including expenses incurred by other entities on your behalf. Please clearly disclose the allocation method used for each material type of cost allocated and your assertion that the methods used are reasonable. Refer to SAB Topic 1:B.1.

CSTM answered

No reply letter found.

SEC letter of Feb 27, 2013 ↗ no reply letter on EDGAR (the company may have answered in an amended filing)
Market and Industry Data, page iii
SEC asked (1)
Please refer to comment 11 in our letter dated December 31, 2012. As previously requested, please provide us supplementally with copies of the third party sources referenced in the registration statement, appropriately marked to point out the information you are using to support your disclosures.
CSTM answered

No reply letter found.

Summary of Consolidated Historical Financial Data, page 17
SEC asked (2)
We note your response to comment 18 in our letter dated December 31, 2012. In regards to your presentation of Segment Adjusted EBITDA and Management Adjusted EBITDA, please address the following:  We continue to believe that you should further clarify in your disclosures why both of these Adjusted EBITDA amounts are useful performance measures pursuant to Item 10(e)(1)(i)(C) of Regulation S-K.
Rest of the question

Your current disclosures address why you believe an Adjusted EBITDA-related performance measure is useful; however, you do not address why two different Adjusted-EBITDA-related measures are useful. Please also confirm that your determination of Management Adjusted EBITDA as presented is consistent with how this measure is determined pursuant to your financial covenants;  As a result of the reconciling items that you have disclosed on pages 72 and F-77, the total of the Segment Management Adjusted EBITDA amounts and Segment Adjusted EBITDA amounts presented starting on page 4 for all segments do not equal the amounts presented on page 19. Please accordingly expand your disclosures subsequent to your discussion of each operating segment on page 7 to discuss these reconciling items;  Please expand your disclosures to discuss how you calculate the amount of the metal price lag adjustment to arrive at Management Adjusted EBITDA; and  We continue to have difficulty understanding how you determined it was appropriate to present alternative Management Adjusted EBITDA amounts as well as your basis for assuming that you would have had similar cost savings amounts in 2009 and 2010 compared to what you had in 2011. Please either remove your presentation of these alternative Management Adjusted EBITDA amounts in note (k) or further advise.

CSTM answered

No reply letter found.

Summary of Consolidated Historical Financial Data, page 17
SEC asked (3)
Given that metal price lag appears to have a direct impact on your profitability, it is not clear why your disclosures on pages 19, 101, and elsewhere throughout the filing indicate that it is not an indicator of the performance of your underlying operations. Please revise your disclosures accordingly throughout the filing.
CSTM answered

No reply letter found.

Risk Factors, page 21 · We are principally owned by Apollo, Rio Tinto and FSI…, page 35
SEC asked (4)
We note your revised disclosure in response to comment 25 in our letter dated December 31, 2012. Further revise your risk factor disclosure to briefly explain the legal significance of a “binding nomination,” indicating also the number of binding nominations each of your three principal shareholders may put forward.
CSTM answered

No reply letter found.

Use of Proceeds, page 44
SEC asked (5)
Please include here the company’s reasons for conducting the offering as you have stated them in your response to comment 31 in our letter dated December 31, 2012.
CSTM answered

No reply letter found.

Use of Proceeds, page 44
SEC asked (6)
Your disclosures indicate that you intend to use the net proceeds of this offering for general corporate purposes, which may include the repayment of debt. Please make sure your Use of Proceeds discussions on pages 16 and 44 are consistent. Specifically, the disclosures on page 16 do not mention the possibility of using the net proceeds to repay debt.
Rest of the question

Please also confirm that there are no specific plans at this time to use the net proceeds to repay debt.

CSTM answered

No reply letter found.

Management’s Discussion and Analysis · Key Factors Influencing Constellium’s Financial Condition and Results from Operations, page
SEC asked (7)
Given that the price of metal can significantly impact your overall profitability, please consider disclosing metal prices or discussing the overall market movements for metal prices during each period as well as any material changes to these prices that have taken place subsequent to the end of the period. Refer to Item 303(a)(3)(ii) of Regulation S-K.
CSTM answered

No reply letter found.

Results of Operations, page 59
SEC asked (8)
We note your response to comment 39 in our letter dated December 31, 2012. In a similar manner to your response, please expand your disclosures to discuss the impact of your use of financial instruments to minimize the risks associated with foreign currency exchange rates and metal prices.
CSTM answered

No reply letter found.

Liquidity and Capital Resources, page 74
SEC asked (9)
We note your response to comment 45 in our letter dated December 31, 2012. Please disclose whether you have held any positions in the past which resulted in margin calls and the extent of these margin calls.
CSTM answered

No reply letter found.

Contractual Obligations, page 78
SEC asked (10)
We note your response to comment 48 in our letter dated December 31, 2012. Given that it appears the interest rate under the term loan facility is the greater of 8% or a LIBORbased rate plus a floor, please help us better understand how you determined it would be appropriate to reflect the floor of 1.25% for purposes of estimating interest payments.
CSTM answered

No reply letter found.

Aerospace & Transportation Operating Segment, page 85
SEC asked (11)
Please revise your disclosure to include a summary of your response to comment 51 in our letter dated December 31, 2012.
CSTM answered

No reply letter found.

Principal and Selling Shareholders, page 121
SEC asked (12)
Please ensure that your disclosure here complies with the requirements of Item 9.D in Part I of Form 20-F, and in particular Item 9.D.2 requirements of specifying the amount and percentage of securities held by the selling shareholders immediately after the offering.
CSTM answered

No reply letter found.

Dutch Corporate Governance Code, page 138
SEC asked (13)
Please include here a summary of your response to comment 73 in our letter December 31, 2012.
CSTM answered

No reply letter found.

Financial Statements for the Period Ended June 30, 2012 · Note 17. Borrowings, page F-18
SEC asked (14)
We note your response to comment 41 in our letter dated December 31, 2012. Please also expand your disclosures in the notes to the financial statements to clearly state whether you were in compliance with all covenants and to discuss the terms of the significant covenants that you are subject to in your debt agreements.
Rest of the question

For example, your disclosures on page 72 refer to a financial maintenance covenant under your ABL Facility, which it does not appear is discussed in the notes to the financial statements on page F-20.

CSTM answered

No reply letter found.

F-37 · Goodwill, page F-37
SEC asked (15)
We note your response to comment 91 in our letter dated December 31, 2012. Your response indicates that your cash-generating units generally correspond to an industrial site whereas your disclosures on page F-37 indicate that goodwill is monitored at the operating segment level. It is not clear if your cash-generating units are your operating segments or your industrial sites. Please clarify in your disclosures.
CSTM answered

No reply letter found.

Note 2.6 Judgments in Applying Accounting Policies and Key Sources of Estimation · Uncertainty, page F-46
SEC asked (16)
We note your response to comment 95 in our letter dated December 31, 2012. It is unclear what additional disclosures were provided pursuant to IAS 1.125 to help users of the financial statements understand the judgments that you make about the future and other sources of estimation uncertainty.
Rest of the question

Please consider disclosing how you derive estimates and related assumptions, how accurate those estimates/assumptions have been in the past, and whether the estimates/assumptions are reasonably likely to change in the future. Please also consider providing quantitative as well as qualitative information when information is reasonably available.

CSTM answered

No reply letter found.

Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-48
SEC asked (17)
We note your response to comment 97 in our letter dated December 31, 2012. Please help us further understand how your application of IFRS 3 led to a further reduction in the value of property, plant and equipment and intangible assets after the recording of an impairment charge pursuant to IAS 36.
Rest of the question

Please specifically address the following:  IAS 36.18 states that the recoverable amount is the higher of an asset’s or cashgenerating unit’s fair value less costs to sell and its value in use. Please tell us what consideration was given to the value in use in your analysis;  Please tell us what consideration you gave to IAS 36.23 in determining that you should use the recoverable amount for cash-generating units instead of for individual assets. In this regard, we note that for purposes of applying IFRS 3, you indicate that you were able to perform an asset by asset assessment;  You state that the fair value was assigned to each cash-generating unit in a rational and systematic manner. Given that it appears you would have determined the fair value for each cash-generating unit, it is not clear why you would be allocating amounts at the cash-generating unit level. Please advise;  Please help us understand how you allocated the impairment loss to the assets of the cash-generating unit pursuant to IAS 36.104 through 107; and  Please help us better understand why the fair value determined pursuant to IFRS 3 would be significantly less than the fair value less costs to sell pursuant to IAS 36.

CSTM answered

No reply letter found.

Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-48
SEC asked (18)
We note your response to comment 98 in our letter dated December 31, 2012. Your response indicates that you did not recognize a contingent liability because the fair value could not be measured reliably. In this regard, please provide the disclosures called for by paragraph B64(j)(i) and (ii) of IFRS 3.
CSTM answered

No reply letter found.

Note 10. Earnings Per Share, page F-52
SEC asked (19)
We note your response to comment 100 in our letter dated December 31, 2012. We continue to believe that you should disclose instruments (including contingently issuable shares) that could potentially dilute basic earnings per share in the future but were not included in the calculation of diluted earnings per share because they were antidilutive for the period presented. Refer to IAS 33.70(c).
Rest of the question

Though the additional shares may not be material to current earnings per share amounts, it is not clear how you determined they would not be material to future earnings per share amounts.

CSTM answered

No reply letter found.

Note 16. Trade Receivables and Other · Factoring Arrangements, page F-56
SEC asked (20)
We note your response to comment 103 in our letter dated December 31, 2012. It is not clear where you provided additional disclosures regarding the cash flow statement presentation of your factoring arrangements. Please advise or revise your disclosures as necessary.
CSTM answered

No reply letter found.

Note 20. Provisions, page F-67
SEC asked (21)
We note your response to comment 106 in our letter dated December 31, 2012. Please provide the disclosures required by IAS 37.85 for the litigation accrual of 8 million Euros at December 31, 2011.
CSTM answered

No reply letter found.

Note 20. Provisions, page F-67
SEC asked (22)
We note your response to comment 107 in our letter dated December 31, 2012. Please also disclose or tell us what consideration you gave to disclosing the average settlement amount per claim as well as historical and expected trends in the liability amounts and their reasonably likely effects on operating results and liquidity.
CSTM answered

No reply letter found.

Note 21. Share Capital, page F-68
SEC asked (23)
We note your response to comment 109 in our letter dated December 31, 2012. In a similar manner to your response, please clarify the economic rights, including dividend rights of each class of shares in the notes to the financial statements.
Rest of the question

Please also clarify in your disclosures how the different classes of shares are treated for purposes of determining earnings per share, including what consideration was given to IAS 33.A13 and A14 in determining whether you have participating equity instruments and two-class ordinary shares.

CSTM answered

No reply letter found.

Note 26. Operating Segment Information, page F-76
SEC asked (24)
We note your response to comment 112 in our letter dated December 31, 2012. It appears that you have included Holding and Corporate assets as part of the Intersegment and Other line item in your reconciliation from segment assets to total assets. Please separately present Holding and Corporate assets in your reconciliation. Please also disclose the nature of the assets described as Intersegment and Other.
CSTM answered

No reply letter found.

Note 30. Share Equity Plan, page F-80
SEC asked (25)
We note your response to comment 115 in our letter dated December 31, 2012. Please address the following:  Please help us better understand how you determined that the April 2011 and July 2011 share issuances fall outside the scope of IFRS 2 given that the purpose of these issuances was to align management’s interests with the interests of shareholders and to enable management to participate in the long-term growth
Rest of the question

of the company;  Please confirm there were no new shares acquired or reissued under the Management Equity Plan during 2012. If so, please tell us the dates and the corresponding fair values of the shares;  Please tell us what consideration was given to IFRS 2.19 through 21 in determining how to treat the vesting provisions in terms of determining the fair value of the class B shares as well as determining how and when to record the expense associated with the share issuances; and  Please disclose the factors which have caused significant differences between the fair values of the class A and B shares.

CSTM answered

No reply letter found.

Financial Statements for the Year Ended December 31, 2010 and December 31, 2009 · Allocations from Owners, page F-98
SEC asked (26)
We note your response to comment 119 in our letter dated December 31, 2012. Please clearly disclose the allocation method used for each material type of cost allocated.
CSTM answered

No reply letter found.

SEC letter of Apr 8, 2013 ↗ no reply letter on EDGAR (the company may have answered in an amended filing)
General
SEC asked (1)
Please note that any comments regarding your confidential treatment request will be sent under separate cover and we will not consider a request for acceleration of effectiveness of the registration statement until we resolve all issues concerning the confidential treatment request.
CSTM answered

No reply letter found.

Holdings and Corporate, page 7
SEC asked (2)
We note your response to comment two in our letter dated February 27, 2013. Please also disclose the percentage of Management Adjusted EBITDA which is attributable to Holdings and Corporate.
CSTM answered

No reply letter found.

Risk Factors, page 22 · Our indebtedness could materially adversely affect our ability to invest in or fund our operations…, page 30
SEC asked (3)
In light of your ability to negotiate a greater term loan which will be used to fund the €250 million distribution to your equity holders (refer to your “Term Loan” disclosure on page 128), with a view towards disclosure, please tell us what consideration you have given to updating your risk factor disclosure to adequately describe how your indebtedness may impact your operations.
CSTM answered

No reply letter found.

Use of Proceeds, page 45
SEC asked (4)
We note your response to comment six in our letter dated February 27, 2013. You intend to use the net proceeds of this offering for general corporate purposes, which may include the repayment of debt. Please tell us if there are specific plans at this time to use the net proceeds to repay debt.
Rest of the question

Please address what consideration you gave as to whether pro forma financial information should be provided for the repayment of debt from the use of offering proceeds as well as the refinancing of the term loan which is discussed on page 128. Refer to Article 11 of Regulation S-X.

CSTM answered

No reply letter found.

Results of Operations · Segment Adjusted EBITDA, page 71
SEC asked (5)
We continue to believe that you should better quantify the impact of each significant factor when multiple factors contribute to material changes in Segment Adjusted EBITDA. For example, for the Aerospace & Transportation segment for the year ended December 31, 2012 compared to the year ended December 31, 2011, Segment Adjusted EBITDA more than tripled.
Rest of the question

There appear to be multiple factors which resulted in this net increase, which include increased pricing and spreads on aerospace products, lower overhead and laboring expenses in Sierre, increased R&D costs, and the weakening of the Swiss franc. Please revise your discussion accordingly. Refer to Items 303(a)(3)(i) and (iii) of Regulation S-K as well as Financial Reporting Codification 501.04.

CSTM answered

No reply letter found.

Cash Flows, page 77 · Net Cash from Operating Activities, page 77
SEC asked (6)
Please expand your disclosures to discuss the underlying reasons for changes in working capital components, with specific discussions for trade receivables and inventories. Given the impact that changes in your trade receivables had on your cash flows from operations, please also consider whether a discussion of financial measures such as days sales outstanding would be relevant to a reader of your financial
Rest of the question

statements. See Section IV.B of the SEC Interpretive Release No. 33-8350.

CSTM answered

No reply letter found.

Contractual Obligations, page 79
SEC asked (7)
We note your response to comment 10 in our letter dated February 27, 2013. In a similar manner to your response, please clarify in your disclosures that the interest rate used for purposes of purposes of estimating interest payments in the table is an assumed 1.25% floor plus 8%.
CSTM answered

No reply letter found.

Financial Statements · Consolidated Statement of Financial Position, page F-5
SEC asked (8)
On March 13, 2013, the Board of Directors approved a one-time distribution of approximately 250 million Euros. Please present a pro forma statement of financial position alongside the historical statement of financial position reflecting the distribution with corresponding footnote disclosure. Please also provide the pro forma per share data required by SAB Topic 1:B.3 regarding this distribution.
Rest of the question

In this regard, we note that the distribution amount exceeds your earnings for the year ended December 31, 2012.

CSTM answered

No reply letter found.

Notes to the Financial Statements · Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-23
SEC asked (9)
We note your response to comment 17 in our letter dated February 27, 2013. Given the proximity of the your impairment assessment as of December 31, 2010 to the acquisition on January 4, 2011, we continue to have difficulty understanding what caused such a significant further reduction in the value of property, plant and equipment at the time of the acquisition.
Rest of the question

If the recoverable amount of an asset is less than its carrying amount, IAS 36.59 requires an impairment charge to be recorded so that the carrying amount of the asset is reduced to its recoverable amount. Pursuant to IAS 36.18, the recoverable amount is defined as the higher of an asset’s or cash-generating unit’s fair value less costs to sell and its value in use. You used the fair value less costs to sell to determine the recoverable amount, which you believe would be essentially the same as the value in use. IFRS 3.18 requires identifiable assets acquired to be measured at their acquisition-date fair values. Given that there does not appear to be any difference in how fair value is defined in IAS 36.25 and Appendix A of IFRS, please help us understand why the fair value less costs to sell would be higher under IAS 36 compared to the fair value pursuant to IFRS 3.

CSTM answered

No reply letter found.

Notes to the Financial Statements · Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-23
SEC asked (10)
The balance sheet as of December 31, 2010 includes 214 million Euros of property, plant and equipment whereas the fair value of property, plant and equipment acquired on January 4, 2011 was 91 million Euros. If there are factors aside from the write-down to fair value pursuant to IFRS 3 which contributed to this decrease, please identify each factor and the corresponding amount.
CSTM answered

No reply letter found.

Notes to the Financial Statements · Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-23
SEC asked (11)
You indicate that the acquisition-date fair value of property, plant and equipment under IFRS 3 was measured primarily using a cost approach adjusted by economic obsolescence determined using the income approach. Please help us understand how this cost-based methodology results in you measuring these assets at acquisition-date fair value pursuant to IFRS 3.18.
CSTM answered

No reply letter found.

Notes to the Financial Statements · Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-23
SEC asked (12)
At April 2012, the 2010 impairment charge was re-assessed and it was determined that the change in fair value as a result of the ultimate settlement did not create a material change in the impairment charge as when it was applied to the cash generating units it was primarily applied to either cash generating units for which assets had already been fully impaired or where the cash generating units did not require any
Rest of the question

impairments. Please provide us with a summary of this analysis performed by cash generating units. Your analysis should show each of the cash generating units which was impacted by the write-down of property, plant and equipment upon acquisition pursuant to IFRS 3 and the corresponding amount of the reduction in value. For each of these cash generating units, please explain how you determined that there was no impact to the 2010 impairment charge recorded pursuant to IAS 36.

CSTM answered

No reply letter found.

Note 12. Earnings Per Share, page F-32
SEC asked (13)
Please help us understand and disclose how you determined Class B2 shares should be treated as ordinary shares for purposes of determining earnings per share given that Class B2 shares are subject to vesting. Refer to IAS 33.6.
Rest of the question

Please clarify if you have determined Class B2 shares to be participating pursuant to IAS 33.A13 and A14 as well as whether the rights to dividends held by Class B2 shareholders are nonforfeitable.

CSTM answered

No reply letter found.

Note 18. Share Capital, page F-39
SEC asked (14)
We note your response to comment 23 in our letter dated February 27, 2013. We continue to believe that you should further clarify the differences between Class B1 and B2 shares in your disclosures. For example, your response to comment 109 in our letter dated December 31, 2012 states that Class B2 shares have a right to a pro rata part of the profits; however, prior to conversion to Class B1 shares, such profits
Rest of the question

shall be attributed to the dividend reserve for the Class B2 shares. This amount will be added to the dividend reserve for the Class B1 shares upon conversion to Class B1 shares. Please also disclose what happens to the Class B2 dividend reserve if the shares do not convert to Class B1 shares.

CSTM answered

No reply letter found.

Note 22. Provisions, page F-49 · Legal Claims and Other Costs, page F-50
SEC asked (15)
In regards to litigation and disease claims, you do not anticipate that the resolution will have a material effect on your future results. Please also disclose the expected impact of the resolution of these matters on your financial position and cash flows.
CSTM answered

No reply letter found.

Note 29. Subsidiaries and Operating Segments, page F-64
SEC asked (16)
It appears that the cross operating segment represents the packaging and automotive rolled products segment as disclosed on page F-24. Please revise your disclosures as necessary.
CSTM answered

No reply letter found.

Note 30. Share Equity Plan, page F-65
SEC asked (17)
It appears that the vesting period that you refer to related to the Class B2 shares actually represents the period of time over which the Class B2 shares can be converted into Class B1 shares. Please clarify accordingly in your disclosures as well as disclose how you determined that this period should be treated as the vesting period for purposes of accounting for these shares pursuant to IFRS 2.
CSTM answered

No reply letter found.

Note 32. Subsequent Events, page F-66
SEC asked (18)
In March 2013, you received a binding offer for the purchase of two plants in France. It does not appear that these assets were classified as held for sale on your statement of financial position as of December 31, 2012. Based on the terms of the offer, please tell us what consideration you gave as to whether the carrying amount of the assets are recoverable.
CSTM answered

No reply letter found.

SEC letter of Apr 23, 2013 ↗ no reply letter on EDGAR (the company may have answered in an amended filing)
Recent Developments, page 14
SEC asked (1)
You present Management Adjusted EBITDA and Adjusted EBITDA for the last twelve months ended March 31, 2013. In a similar manner to your reconciliations for the three months ended March 31, 2013, please reconcile these non-GAAP financial measures to the corresponding GAAP financial measure.
CSTM answered

No reply letter found.

Recent Developments, page 14
SEC asked (2)
You currently anticipate issuing preference shares to your existing Class A and Class B1 shareholders. Please expand your disclosures to explain how you will determine how many preference shares each Class A and B1 shareholder will receive, including if they will receive a pro-rata number of shares based on their current ownership.
Rest of the question

Please clarify if any preferential treatment will be given to any of the shareholders in determining the number of preference shares they will receive. Please also clearly disclose the significant terms of these preference shares in your recent developments section.

CSTM answered

No reply letter found.

Recent Developments, page 14
SEC asked (3)
Please clarify, if true, that you anticipate paying a distribution of 147 million Euros to Class A preference shareholders throughout your filing rather than just referring to Class A shareholders. In this regard, we note the disclosures on page 140 which indicate that only preference shareholders will receive the additional distribution of 147 million Euros.
CSTM answered

No reply letter found.

Selling Shareholder Private Sale, page 15
SEC asked (4)
Please tell us the percentage of Class A ordinary shares that you expect will be sold by Apollo and Rio Tinto to FSI as part of the selling shareholder private sale.
CSTM answered

No reply letter found.

Selling Shareholder Private Sale, page 15
SEC asked (5)
Please tell us what consideration you have given to filing the share purchase agreement as an exhibit to the registration statement. In addition, please clarify whether FSI will sell shares in the offering. We note that you have included FSI in the “Principal and Selling Shareholders” table, but since you have not yet disclosed the number of shares being offered in this offering, it is unclear to us whether FSI will
Rest of the question

offer shares, or whether it is in the table because it is a 10% shareholder prior to the offering.

CSTM answered

No reply letter found.

Dividend Policy, page 47
SEC asked (6)
You disclose on page F-31 that the Class A, B1, and B2 shares have equal rights to profit allocation and dividends. In this regard, please disclose why the distribution of 103 million Euros was only made to holders of Class A and B1 ordinary shares. In addition, your disclosures on page 140 indicate that only Class A preference shareholders will receive the additional planned 147 million Euros distribution.
Rest of the question

It appears that only holders of Class A and B1 ordinary shares will receive preference shares and correspondingly the 147 million Euros distribution.

CSTM answered

No reply letter found.

Capitalization, page 48
SEC asked (7)
It is not clear why the preference shares in your capitalization table are presented with cash and cash equivalents rather than with your other equity accounts to arrive at total deficit. Please advise or revise as necessary.
CSTM answered

No reply letter found.

Capitalization, page 48
SEC asked (8)
Based on the description above your capitalization table, it does not appear that you intend to present the 147 million Euros planned distribution discussed on page 47. Please revise to include this distribution.
CSTM answered

No reply letter found.

Capitalization, page 48
SEC asked (9)
Please disclose whether the proceeds of the New Term Loan obtained in the March 25, 2013 financing were used to pay the 103 million Euros distribution.
CSTM answered

No reply letter found.

Dilution, page 50
SEC asked (10)
With a view towards disclosure, please tell us whether the preference shares you intend to distribute to your existing Class A and Class B1 shareholders will have a dilutive impact to the investors’ interest in the IPO. In this regard we note your disclosure on page 15 under “Recent Developments.”
CSTM answered

No reply letter found.

Selected Financial Information, page 54
SEC asked (11)
There appears to be a typographical error in note (1) to the table presented on page 55. It appears that net trade working capital is determined by subtracting the current portion of trade payables and other rather than trade receivables and other. Please revise as necessary.
CSTM answered

No reply letter found.

Cash Flows, page 80 · Net Cash from Operating Activities, page 80
SEC asked (12)
We note your response to comment six in our letter dated April 8, 2013. Please expand your disclosures to explain how you calculate net working capital days as well as how this measure helps readers evaluate your financial statements.
CSTM answered

No reply letter found.

Notes to the Financial Statements · Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-22
SEC asked (13)
We note your response to comment nine in our letter dated April 8, 2013. The vast majority of the difference in fair value from December 31, 2010 to January 4, 2011 appears to be attributable to the impact of the difference in discount rates used.
Rest of the question

You note that a different discount rate was applied by the Successor as part of the purchase price allocation to reflect a greater cost of capital attributable as a stand-alone rather than that which was attributed to the Predecessor as a group of entities managed by a large conglomerate. Please help us better understand how you determined the appropriate discount rate to use as of December 31, 2010 pursuant to IAS 36.55 through 57 and IAS 36.A15 through A21. It appears that this guidance suggests that the discount rate used should reflect the risks specific to the assets or cash-generating units being evaluated. It is not clear why there would be a significant difference in the discount rates used based on whether the company was a stand-alone entity or managed by a large conglomerate. In this regard, IAS 36.A17 indicates that an entity can use their weighted average cost of capital as a starting point; however, IAS 36.A18 indicates that this rate should be adjusted for specific risks related to the asset’s estimated cash flows. Please advise.

CSTM answered

No reply letter found.

Notes to the Financial Statements · Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-22
SEC asked (14)
Please tell us what the amount of the impairment loss would have been for the year ended December 31, 2010 if you had used the same discount rates as were used as part of the purchase price allocation on January 4, 2011.
CSTM answered

No reply letter found.

Notes to the Financial Statements · Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-22
SEC asked (15)
You used discount rates of 17% to 18.5% as of January 4, 2011 whereas such rates in the predecessor period were 11.5% to 14%. It appears that the discount rates of 17% to 18.5% were used in the discounted cash flow analysis performed to determine economic obsolescence when applying the depreciated replacement cost method as of January 4, 2011.
Rest of the question

It is not clear how you applied the discount rates of 11.5% to 14% in your December 31, 2011 analysis pursuant to IAS 36. For example, please clarify if these were the rates used to determine the total business enterprise value of 1.2 billion Euros which was assigned to each cash-generating unit and then adjusted for the pension liability, debt facility, and estimated working capital adjustment.

CSTM answered

No reply letter found.

Note 12. Earnings Per Share, page F-30
SEC asked (16)
We note your response to comment 13 in our letter dated April 8, 2013. We continue to have difficulty understanding how you determined Class B2 shares are ordinary shares versus potential ordinary shares pursuant to IAS 33.5 through 7.
Rest of the question

Given that Class B2 shares are subject to vesting, please provide us with a comprehensive explanation as to how you determined these are ordinary shares and are not participating securities pursuant to IAS 33.A13 and A14.

CSTM answered

No reply letter found.

Note 18. Share Capital, page F-39
SEC asked (17)
We note your response to comment 14 in our letter dated April 8, 2013. Please expand your disclosures to clearly explain the differences between Class B1 and B2 shares in your disclosures. For example, you should clarify if the only difference is the vesting terms associated with Class B2 shares as well as if only Class B2 shares are issued under the share equity plan.
CSTM answered

No reply letter found.

Note 32. Subsequent Events, page F-63
SEC asked (18)
We note your response to comment 18 in our letter dated April 8, 2013. In the fourth quarter and up to the 2012 financial statement issuance date, you assessed the potential impact of the disposal process on the carrying amount of the assets related to the Ham and Saint-Florentin sites and determined that the recoverable amount was not less than the carrying value.
Rest of the question

It is not clear what consideration you gave to the binding offer received in March 2013 and whether this offer was before or after the 2012 financial statement issuance date. Based on the terms of the offer, please tell us what consideration you gave as to whether the carrying amounts of the assets are recoverable. If the recoverable amounts based on this offer were less than the carrying amounts, please tell us the amount of the difference.

CSTM answered

No reply letter found.

Note 33. Pro Forma Information (Unaudited), page F-63
SEC asked (19)
We note your response to comment eight in our letter dated April 8, 2013. Prior to the completion of this offering, you will issue preference shares. Please also reflect the issuance of the preference shares in your pro forma statement of financial position and in your determination of pro forma per share data.
Rest of the question

In this regard, your disclosures on page 140 indicate that these preference shares will be participating securities pursuant to IAS 33.A13 and A14

CSTM answered

No reply letter found.

SEC letter of May 3, 2013 ↗ no reply letter on EDGAR (the company may have answered in an amended filing)
General
SEC asked (1)
We note that on the prospectus cover page you have reflected the change in the company name and the form of corporate entity. Please reflect this change also with respect to company signature on page II-3 of the registration statement. In addition, please submit with your next amendment drafts of your legal opinion and the form of Amended and Restated Articles of Association of Constellium Holdco B.V.
Rest of the question

for our review, as well as explain to us why the amended and restated articles of association are not those of Constellium N.V. In this regard, we note your “Corporate History and Information” on page 17 where you anticipate the conversion of the company into a Dutch public limited liability company renamed Constellium N.V. to occur immediately prior to the consummation of this offering. Please clarify whether you expect that the conversion will take place before or after effectiveness. For further guidance, please refer to Sections II.B.2(e) and (f) of Staff Legal Bulletin No.19 (CF) dated October14, 2011.

CSTM answered

No reply letter found.

Recent Developments, page 14 · New Term Loan, Application of Term Loan Proceeds and Issuance of Preference Shares, page 16
SEC asked (2)
We note your response to comment two in our letter dated April 23, 2013. Once the 147 million Euros distribution has been paid on the preference shares, the rights attached to the preference shares will automatically and immediately become equal to the rights attached to the ordinary shares.
Rest of the question

You have agreed with your existing shareholders to repurchase the preference shares for no consideration following the payment of the 147 million Euros. Please expand your disclosures to provide additional clarity as to what will happen after the 147 million Euros distribution is paid. Please further clarify if the repurchase of the preference shares will occur simultaneously with the payment of the distribution. If so, it is not clear why the holders would continue to have rights equal to the holders of ordinary shares.

CSTM answered

No reply letter found.

Provisions of our documents and applicable law may impede or discourage a takeover…, page
SEC asked (3)
We note that you have added disclosure at the end of this risk factor stating that due to some of your products which may have applications in the defense sector, you may be subject to rules and regulations in jurisdictions that could impede or discourage takeovers.
Rest of the question

Here or in an appropriate section of the filing, please expand your disclosure to identify this category of products and to better explain the resulting implications of being subject to such rules and regulations.

CSTM answered

No reply letter found.

Capitalization, page 50
SEC asked (4)
Please clearly show in the notes how you computed each pro forma and as adjusted pro forma amount, including a discussion of any significant assumptions and estimates used to arrive at the amounts. For example, you should clearly disclose in the note to the table each of the adjustments and corresponding amounts that impacted the as adjusted and as adjusted pro forma cash and cash equivalents as well as retained
Rest of the question

deficit amounts.

CSTM answered

No reply letter found.

Capitalization, page 50
SEC asked (5)
We note your response to comment seven in our letter dated April 23, 2013. In a similar manner to your response, please clearly disclose why you are not presenting preference shares in your capitalization table.
CSTM answered

No reply letter found.

Capitalization, page 50
SEC asked (6)
The as adjusted and as adjusted pro forma column headings refer to notes 11 and 12 but there do not appear to be any corresponding notes 11 and 12. Please revise as necessary.
CSTM answered

No reply letter found.

Capitalization, page 50
SEC asked (7)
Please present the historical, as adjusted, and as adjusted pro forma shares authorized, issued and outstanding in your capitalization table.
CSTM answered

No reply letter found.

Issuance of Ordinary Shares, page 146
SEC asked (8)
We note your disclosure that prior to completion of this offering, the shareholders will adopt a resolution in connection with the issuance prior to the conversion of Constellium into a Dutch public limited liability company, of a maximum of 94,289,289 Class A ordinary shares, 915,702 Class B1 ordinary shares and 1,037,493 Class B2 ordinary shares.
Rest of the question

With a view towards disclosure please explain to us the transactions pursuant to which these shares will be issued, including the corresponding accounting and who is receiving these shares. In addition, please disclose the transaction(s) throughout the filing, including under the recent development section, and indicate how these issuances are reflected in your capitalization table and whether they will have a dilutive effect.

CSTM answered

No reply letter found.

Financial Statements
SEC asked (9)
Page 20 indicates that a stock split will occur prior to this offering. Please revise your financial statements and your disclosures throughout the filing to give retroactive effect to the expected stock split. Doing this in the next amendment will save us substantial review time in future amendments.
Rest of the question

If your auditors believe that only a “draft” report can be presented, due to a pending future event such as the stock split, they can include in the filing a signed and dated preface to their “draft” report stating the reason for the “draft” report and that they expect to be in a position to issue the report in the form presented prior to effectiveness. A signed, dated, and unrestricted auditor’s report should be included in the filing prior to effectiveness. See Rule 2-02 of Regulation S-X.

CSTM answered

No reply letter found.

Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-22
SEC asked (10)
We are continuing to evaluate your responses to comments 13 through 15 in our letter dated April 23, 2013 and may have additional comments.
CSTM answered

No reply letter found.

Note 12. Earnings Per Share, page F-30
SEC asked (11)
We note your response to comment six in our letter dated April 23, 2013. Your response indicates that each class of shares only has rights to dividends to the extent of their share premium reserves. In addition, your disclosures on page 146 regarding the order in which the holders of Class A ordinary, Class B ordinary shares, and preference shares are entitled to profits indicate that the remaining profits after the
Rest of the question

147 million Euros distribution is made may not be allocated equally in certain circumstances. Please further clarify in your disclosures the rights to dividends and profits that each class is entitled to in the notes to the financial statements. In light of these potential differences, please tell us what consideration you gave to IAS 33.A13 and A14 for purposes of calculating earnings per share amounts.

CSTM answered

No reply letter found.

Note 12. Earnings Per Share, page F-30
SEC asked (12)
Please help us understand why the earnings amount you are using to calculate basic and diluted earnings per share appears to include the amount attributable to non-controlling interests. Refer to IAS 33.A1.
CSTM answered

No reply letter found.

Note 18. Share Capital, page F-37
SEC asked (13)
Please confirm there were no equity issuances since January 1, 2013 as well as any planned future equity issuances. If there were any, please provide the following for each transaction:  identify the parties, including any related parties;  the purpose of the issuance;  how you accounted or will account for the issuance;  the nature of any consideration;  the fair value and your basis for determining the fair
Rest of the question

value; and o Indicate whether the fair value was contemporaneous or retrospective. o To the extent applicable, reconcile the fair values you used for equity transactions to the fair value indicated by the anticipated IPO price. For equity transactions in which your Board of Directors estimated the fair value, please provide us with a detailed explanation of the significant factors, assumptions, and methodologies used in determining fair value.

CSTM answered

No reply letter found.

Note 30. Share Equity Plan, page F-62
SEC asked (14)
We note your response to comment 16 in our letter dated April 23, 2013. Your disclosures on page F-62 do not appear to indicate that any unvested limited partnership interests in the management equity plan have been issued since the plan was implemented in 2011. Please confirm and clarify your disclosures accordingly.
Rest of the question

Similarly, your disclosures on page F-31 state that no instruments have been issued that may potentially have a dilutive effect.

CSTM answered

No reply letter found.

Note 33. Pro Forma Information (Unaudited), page F-63
SEC asked (15)
We note your response to comment 19 in our letter dated April 23, 2013. Please clearly disclose how you are arriving at the amount of earnings for the twelve months preceding the dividend distribution, including the specific months that are being included in your computation.
Rest of the question

We also remind you that the number of shares to be added to the denominator for purposes of pro forma per share data should not exceed the total number of shares to be issued in the offering.

CSTM answered

No reply letter found.

SEC letter of May 9, 2013 ↗ no reply letter on EDGAR (the company may have answered in an amended filing)
Prospectus Cover Page
SEC asked (1)
Please identify the class of ordinary shares being offered by the selling shareholders. Please also ensure that the Principal and Selling Shareholders disclosure on page 136 identifies beneficial ownership for each class of ordinary shares.
CSTM answered

No reply letter found.

New Term Loan, Application of Term Loan Proceeds and Issuance of Preference Shares, page
SEC asked (2)
We note your revised disclosure in the fourth paragraph relating to the preference shares. Please clarify, if true, that the rights attached to the preference shares that will become equal to the rights attached to the ordinary shares are voting rights and rights to profits, as indicated in your response to our comment 13.
Rest of the question

Please also clarify whether it is likely that the preference shareholders will actually have an opportunity to exercise or benefit from those rights, given that the repurchase of the preference shares might not happen simultaneously with the distribution payment.

CSTM answered

No reply letter found.

Pro Rata Share Issuance, page 17
SEC asked (3)
We note your response to comment nine in our letter dated May 3, 2013 in which you reference a stock split of 23.8:1, reflected also on page F-18 under the “Share Capital” discussion. Since your disclosure here refers to a different ratio of 22.8, please revise your disclosures accordingly.
CSTM answered

No reply letter found.

Selling Shareholder Private Sale, page 18
SEC asked (4)
You disclose at the end of the paragraph that Apollo and Rio Tinto may “elect not to sell in this offering.” In light of your Underwriting disclosure on page 183 stating that you and the selling shareholders have agreed to sell to the underwriters the shares subject to the terms of the underwriting agreement, with a view towards disclosure, please explain to us whether the selling shareholders anticipate to make
Rest of the question

their election before or after effectiveness of the registration statement, and how and when the information will be reflected in your prospectus.

CSTM answered

No reply letter found.

Capitalization, page 51
SEC asked (5)
We note your response to comment four in our letter dated May 3, 2013. Please more clearly show in the notes how you computed the as adjusted pro forma share premium amount. In addition, in arriving at the as adjusted pro forma retained deficit amount, you refer to 15 million Euros of fees and expenses related to this offering.
Rest of the question

Please further clarify in your disclosures the nature of these fees and expenses being reflected in retained earnings compared to those offering costs being reflected as a reduction of offering proceeds in share premium.

CSTM answered

No reply letter found.

Capitalization, page 51
SEC asked (6)
We note your response to comment seven in our letter dated May 3, 2013. Your disclosures refer to shares fully paid up. To be consistent with the terminology used in your financial statements, please refer to shares outstanding.
CSTM answered

No reply letter found.

Financial Statements · General
SEC asked (7)
We note your response to comment nine in our letter dated May 3, 2013. Your response indicates that 83,945,965 additional Class A ordinary shares, 815,252 additional Class B1 ordinary shares, and 923,683 additional Class B2 ordinary shares will be issued and that the pro rata share issuance is the equivalent of a 23.8:1 stock split.
Rest of the question

Please help us better understand how you arrived at the pro rata number of shares to be issued for each class based on the number of shares outstanding as of December 31, 2012 as disclosed on page F-37.

CSTM answered

No reply letter found.

Financial Statements · General
SEC asked (8)
It does not appear that you have consistently given retroactive effect to the expected stock split in your historical amounts, including in note (8) to the capitalization table on page 53 and on page F-37. Please revise your disclosures throughout the filing as necessary to give retroactive effect to the expected stock split.
CSTM answered

No reply letter found.

Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-22
SEC asked (9)
We are continuing to evaluate your response to comment 10 in our letter dated May 3, 2013 and may have additional comments.
CSTM answered

No reply letter found.

Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-22
SEC asked (10)
For both the impairment analysis performed as of December 31, 2010 pursuant to IAS 36 and the purchase price allocation performed as of January 4, 2011 pursuant to IFRS 3, the initial purchase price for the acquisition of the Engineered Aluminum Products business from Rio Tinto was used as the basis for determining fair value.
Rest of the question

During the call held on May 6, 2013, it was indicated that this transaction was not a bargain purchase. Please help us better understand the positive and negative factors that you considered in reaching the conclusion that it was not a bargain purchase.

CSTM answered

No reply letter found.

Note 3. Acquisition of Rio Tinto Engineered Aluminum Products Entities, page F-22
SEC asked (11)
We note in your response letter dated April 29, 2013 that the size premiums selected for the impairment and purchase accounting analyses were based on an estimated equity value of $125 million. As you state, the $125 million does fall within the market capitalization ranges for the Micro Cap (9th and 10th deciles) and Decile 10b categories.
Rest of the question

We note, however, that a $125 million market capitalization is in the lower third of the Micro Cap distribution and above the upper quartile of the Decile 10b distribution. It is our understanding that the size premium generally selected would be the one that is the most statistically relevant to the market capitalization size as to maximize the number of comparable observations. In other words, the size premium selected should be within the central tendency of the distribution. Such selection is especially important in thin market capitalizations due to the sensitivity of the size premium for small changes in market capitalization. We further note in your response to comment nine in your letter dated April 16, 2013 that the discount rate impact was over 80 percent of the value difference from December 31, 2010 to January 4, 2011 for cashgenerating units one through four. Given the sensitivity of the discount rate to the fair value estimates, please advise why a more selective size premium screening was not performed.

CSTM answered

No reply letter found.

Note 12. Earnings Per Share, page F-30
SEC asked (12)
We note your response to comment 11 in our letter dated May 3, 2013. If there will be significant changes in the rights that Class A ordinary shareholders will have to profits after completion of this offering, please disclose these changes throughout the filing including in your description of the offering on page 20.
CSTM answered

No reply letter found.

Exhibit 5.1
SEC asked (13)
Please have counsel revise its opinion to include the shares which may be issued pursuant to the underwriters’ overallotment option.
CSTM answered

No reply letter found.

Exhibit 5.1
SEC asked (14)
With respect to the resolutions listed in paragraph 2(h) of the legal opinion, it appears that the date of these resolutions should pre-date May 2013 considering that they relate to the issuance of shares currently held by the Selling Shareholders.
CSTM answered

No reply letter found.

Exhibit 5.1
SEC asked (15)
Please have counsel revise its opinion in paragraphs 5(b) and (c) to remove the “upon payment in full of the Secondary Shares” and “upon valid execution of the Issue Resolution” qualifications as inappropriate. The Secondary Shares are currently outstanding and the valid execution of the Issue Resolution represents facts readily ascertainable by counsel.
CSTM answered

No reply letter found.

Exhibit 5.1
SEC asked
We note your response to comment 15 in our letter dated May 9, 2013 stating that counsel will not be able to ascertain whether payment for the Secondary Shares will be made in full and therefore it is not able to opine as to whether there are sufficient reserves to cover payment for the Secondary Shares.
Rest of the question

Since the issuance of the prorata shares to the selling shareholders does not involve payment of consideration by them and the prospectus contemplates the prorata issuance to be completed prior to the commencement of the offering, the sale of shares by the selling shareholders should represent sale of shares outstanding prior to the IPO. As such, please have counsel revise its opinion to remove the assumption in Section 3(b).

CSTM answered
Pursuant to Rule 461 promulgated under the Securities Act of 1933, as amended, Constellium N.V. (the “Registrant”) hereby requests that the effective date of the Registrant’s Registration Statement on Form F-1 (File No. 333-188556) be accelerated by the U.S. Securities and Exchange Commission (the “Commission”) to 5:00 p.m.
Rest of the answer

EST on May 22,

2013, or as soon as possible thereafter.

In connection with the foregoing request for acceleration of effectiveness, the

Registrant hereby acknowledges the following:

• should the Commission or its staff, acting pursuant to delegated authority, declare the filing effective, it does not foreclose the Commission from taking any action with respect to the filing;

the action of the Commission or the staff, acting pursuant to delegated authority, in declaring the filing effective, does not relieve the Registrant from its full responsibility for the adequacy and accuracy of the disclosure in the filing; and the Registrant may not assert staff comments or the declaration of effectiveness as a defense in any proceeding initiated by the Commission or any person under the federal securities laws of the United States.

Read in the reply

Letters without questions

Other letters

UPLOAD and CORRESP
3 other letters: notices that a filing will not be reviewed, requests to declare a registration effective, and the like

From the SEC's correspondence on EDGAR: staff letters (form UPLOAD) and company letters (form CORRESP), 34 letters filed since 2012-12-31. Questions and answers are matched by their numbers; topics come from words in each question. The reports are compared word for word (same form, before the first SEC letter against the first report after the company's reply). No AI.

Sources

The SEC's correspondence on EDGAR: staff letters (form UPLOAD) and company letters (form CORRESP), matched question by question. No AI.

Also

Filings: the letters in the filing list.

Work with it

Excel workbook · CSV. Google Sheet that stays up to date: paste =IMPORTDATA("https://tickdelta.com/company/CSTM/export.csv") into a cell.

Next in Owners and insiders:Insider trades
Esc

Type a ticker such as AAPL, a name, an investor such as Buffett, or a topic such as tariffs. ↑ ↓ to move, Enter to open.